OSHA Inspection: DESIGN WORKS IN JACKSONVILLE

Issued

2013-09-24 00:00:00

Abate by

2013-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134 (c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:   a.    On or about July 08, 2013, the employer did not establish a written respiratory program for an employee who was required to wear a 3M disposable respirator when grinding granite.

Issued

2013-09-24 00:00:00

Abate by

2013-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a.    On or about July 08, 2013, the employer did not provide a medical evaluation for an employee who was required to wear a 3M disposable respirator when grinding granite.

Issued

2013-09-24 00:00:00

Abate by

2013-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(2)(iv): Hoist chains, including end connections, for excessive wear, twist, distorted links interfering with proper function, or stretch beyond manufacturer's recommendations. Visual inspection daily; monthly inspection with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was not inspected:  a. On or about August 07, 2013,  the employer did not conduct monthly inspections of the Harrington hoist.

Issued

2013-09-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.242(a): The employer did no ensure the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees:  a. On or about July 08, 2013, the Makita 5-inch disc grinder had damaged plug pins and cord, exposing employees to an electrical hazard.

Issued

2013-09-24 00:00:00

Abate by

2013-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): Employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met, and which also includes the following:  a. On or about August 07, 2013, the employer did not have a written hazard communication program for employees using chemicals in the workplace such as but not limited to Dry Treat.

Issued

2013-09-24 00:00:00

Abate by

2013-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet in the workplace for each hazardous chemical which they use:  a. On or about August 07, 2013, the employer did not have a material safety data sheet for chemicals for employees using chemicals in the workplace such as but not limited to Dry Treat.