OSHA Inspection: WOODSTOCK LLC

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $1600.00 · Current $320.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(5): Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level:  At the job site, 109 S. Main, Whitewater Kansas, employees were working near a floor fan in which the rotating blades were not guarded on the front or back of the fan.   Employees were exposed to amputation and cut hazards.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $2000.00 · Current $400.00 Reduced

General-duty citation text

29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:  At the job site, 109 S. Main, Whitewater Kansas, employees were operating the 10 inch Dewalt radial arm saw in which the cutting head would not rerturn to behind the fence area when released by the operator.   Employees were exposed to amputation and cut hazards.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $1200.00 · Current $240.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  At the job site, 109 S. Main, Whitewater Kansas, employees were working near a floor fan in which the drive pulleys were not guarded.   Employees were exposed to amputation and cut hazards.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  At the job site, 109 S. Main, Whitewater Kansas, employees were working near a floor fan in which the fan drive belt was not guarded.   Employees were exposed to amputation and cut hazards.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $1600.00 · Current $320.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):  At the job site, 109 S. Main, Whitewater Kansas, employees were using an electric floor fan in which the motor wiring was not guarded against accidental contact.   Employees were exposed to electric shock hazards.

Issued

2013-09-30 00:00:00

Abate by

2013-10-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(ii): Flexible cords were not used in continuous lengths without splice or tap:  At the job site, 109 S. Main, Whitewater Kansas, employees were using an extension cord with a splice to provide power to the floor fan.   Employees were exposed to electric shock hazards.