Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: NEVADA ARMY NATIONAL GUARD, AVIONICS DIVISION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NEVADA ARMY NATIONAL GUARD, AVIONICS DIVISION in 20000 ARMY AVIATION DRIVE, RENO, NV 89506 (NAICS 488190). OSHA activity number 339299885.

Watch Nevada Army National Guard, Avionics Division — free Get an email when a new federal OSHA severe-injury report for Nevada Army National Guard, Avionics Division is published. One employer, no account, unsubscribe in one click.
Site address
20000 ARMY AVIATION DRIVE
City
RENO
State
NV
ZIP
89506
Mailing
20000 ARMY AVIATION DRIVE, RENO, NV 89506
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
488190
Employees
25
Ownership type
D

7 citations on file for this inspection.

1910.36 G02

Serious Gravity 1 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  (a) On or about August 6, 2013, in the maintenance supervisor's and instructor's office spaces, the exit/egress was 21  and 22 inches and obstructed by a desk and pelican cases.
Recent events (1)
  • — Z (S) $0

1910.37 B02

Serious Gravity 1 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  (a) On or about August 6, 2013, in the maintenance control quality assurance office and briefing room area, exit doors were not labeled or marked "EXIT".
Recent events (1)
  • — Z (S) $0

1910.157 C01

Serious Gravity 1 2 instances 4 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries.  (a) On or about August 6, 2013, in the supply room area, a portable fire extinguisher was free standing on a metal cabinet.  (b) On or about August 6, 2013, in the supply room area, a portable fire extinguisher was obstructed by a large plastic container.
Recent events (1)
  • — Z (S) $0

1910.303 B02

Serious Gravity 1 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling.  (a) On or about August 6, 2013, in the battery, tools and parts room. re-locatable power taps were used to plug-in a Cevalia coffee maker and other high powered appliances.
Recent events (1)
  • — Z (S) $0

1910.303 F02

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident.  (a) On or about August 6, 2013, in the avionics shop control power panel, some of the circuit breakers were not labeled for their purpose.
Recent events (1)
  • — Z (S) $0

1910.305 B02 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy.  (a) On or about August 6, 2013, in the avionics shop, north wall, an electrical outlet did not have a cover.
Recent events (1)
  • — Z (S) $0

1910.305 G02 III

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws.  (a) On or about August 6, 2013, in the petroleum shop room #158, the Aqua Glow water detector power cord did not have strain relief and the insulation was separating from the outer sheath.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339299885.