Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PAUL ROSS CARPENTRY, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PAUL ROSS CARPENTRY, LLC. in 176 ROUTE 46 WEST, DENVILLE, NJ 07834 (NAICS 238160). OSHA activity number 339326035.

Watch Paul Ross Carpentry, LLC. — free Get an email when a new federal OSHA severe-injury report for Paul Ross Carpentry, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
176 ROUTE 46 WEST
City
DENVILLE
State
NJ
ZIP
07834
Mailing
9 SPRINGBROOK ROAD, HACKETTSTOWN, NJ 07840
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $600.00 Reduced
29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    a)  176 Route 46 West, Denville, NJ and at the Corporate Offices at 9 Springbrook Road, Hackettstown, NJ.    The operator of the Lull Model 844 C-42 Rough Terrain Forklift who was lifting a worker on the tines of his forklift with a makeshift platform of Flakeboard sheets had not received training and evaluation on powered industrial trucks as specified in paragraph (l).                                                    Violation observed on or about 08/20/2013.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2000.00 · Current $900.00 Reduced
29 CFR 1926.102(a)(1):     Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    a)  176 Route 46 West, Denville, NJ.    Worker was exposed to penetrating eye trauma as eye protection was not being used while he was operating a Bostitch Coil-Fed Pneumatic Nailer.                                                        Violation observed on or about 08/20/2013.
Recent events (2)
  • — I (S) $900
  • — Z (S) $2000

1926.451 C02 IV

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $900.00 Reduced
29 CFR 1926.451(c)(2)(iv):     Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:      a)  176 Route 46 West, Denville, NJ.    A worker was exposed to falls as the employer used the rough terrain forklift to support the makeshift scaffold platform of Flakeboard when neither the forklift or the platform were designed by the manufacturer for that purpose.                                       Violation observed on or about 08/20/2013.
Recent events (2)
  • — I (S) $900
  • — Z (S) $2800

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $1992.00 Reduced
29 CFR 1926.451(g)(1):     Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:      a)  176 Route 46 West, Denville, NJ.    The worker was exposed to falls of 16 feet to the ground below from the rough terrain forklift's makeshift platform as no means of fall protection were in use.                                        Violation observed on or about 08/20/2013.
Recent events (2)
  • — I (S) $1992
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339326035.