2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: TITAN BLOCK

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TITAN BLOCK in #8 ESTATE DIAMOND, FREDERIKSTED, VI 00840 (NAICS 327331). OSHA activity number 339390494.

Watch Titan Block — free Get an email when a new federal OSHA severe-injury report for Titan Block is published. One employer, no account, unsubscribe in one click.
Establishment
TITAN BLOCK
Site address
#8 ESTATE DIAMOND
City
FREDERIKSTED
State
VI
ZIP
00840
Mailing
#8 ESTATE DIAMOND, FREDERIKSTED, VI 00840
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327331
Employees
10
Ownership type
A

6 citations on file for this inspection.

1910.305 A04 V

Serious Gravity 1 3 instances 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $600.00 Reduced
29 CFR 1910.305(a)(4)(v): Conductors within 7 feet from the floor, thus considered exposed to physical damage, were not protected:    a) On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the conveyor area, the electrical conductors of the Turn Head machine were not protected from damage.    b) On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the cuber machine area, the electrical conductors of the machine were not protected from damage.    c) On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the maintenance shop area, the electrical conductors of the electrical outlet/light swtich were not protected from damage.    PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.305 B02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $600.00 Reduced
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear:    On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the maintenance shop, an electrical outlet box was not covered.    PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.305 G01 IV A

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $600.00 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used as a substitute for the fixed wiring of a structure:    On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI,, in the electrical room area, a flexible cord was used in lieu of permanent wiring to service a silo sensor.    PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.305 G01 IV B

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(B): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used where run through holes in walls, ceilings, or floors:    On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the electrical room area, a flexible cord that was connected to an electrical panel board was run through a hole on the concrete wall.   PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G02 II

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $600.00 Reduced
29 CFR 1910.305(g)(2)(ii): Flexible cords may be used only in continuous lengths without splice or tap. Hard-service cord and junior hard-service cord No. 14 and larger may be repaired if spliced so that the splice retains the insulation, outer sheath properties, and usage characteristics of the cord being spliced:    On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the maintenance shop area, the electrical cord of the press drill was spliced and repaired with a different electrical cord.     PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  On or about 08/28/13, at #8 Estate Diamond, Frederiksted, VI, in the facility, where employees operate forklifts, the employee training certification had not been completed.  PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339390494.