Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: LOUISIANA RICE MILL

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LOUISIANA RICE MILL in 4 S AVENUE D, CROWLEY, LA 70526 (NAICS 311212). OSHA activity number 339418543.

Watch Louisiana Rice Mill — free Get an email when a new federal OSHA severe-injury report for Louisiana Rice Mill is published. One employer, no account, unsubscribe in one click.
Establishment
LOUISIANA RICE MILL
Site address
4 S AVENUE D
City
CROWLEY
State
LA
ZIP
70526
Mailing
4 S AVENUE D, CROWLEY, LA 70526
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311212
Employees
130
Ownership type
A

4 citations on file for this inspection.

1910.219 D01

Serious Gravity 5 2 instances 5 exposed
Issued
Penalty
Initial $4590.00 · Current $2754.00 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    1) On or about 9/18/13, in the elevator control room on the northeast side of the plant, the employer allowed employees to work next to an unguarded belt and pulley on an auger motor in order to clean up spilled rice.     2) On or about 9/18/13, in the laboratory on the southwest side of the plant, the employer allowed employees to operate a grain sifter with an unguarded belt and pulley, in order to sift grain for quality analysis.
Recent events (2)
  • — I (S) $2754
  • — Z (S) $4590

1910.219 E03 I

Serious Gravity 5 2 instances 5 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o).   1) On or about 9/18/13, in the elevator control room on the northeast side of the plant, the employer allowed employees to work next to an unguarded belt and pulley on an auger motor in order to clean up spilled rice.   2) On or about 9/18/13, in the laboratory on the southwest side of the plant, the employer allowed employees to operate a grain sifter with an unguarded belt and pulley, in order to sift grain for quality analysis.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G02 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6300.00 · Current $3780.00 Reduced
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):    On or about 9/28/2013, the employer allowed employees to access the Master Control Room of the rice elevator on the rough side of the mill containing electrical starters with unguarded live wiring in order to clean-up spilled grain.
Recent events (2)
  • — I (S) $3780
  • — Z (S) $6300

1910.253 B04 III

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour.   On or about 9/12/13, on southwest side of the plant, the employer allowed employees to operate a forklift in a warehouse area where full oxygen and acetlyene canisters were not separated by a distance of 20 and were stored in wire mesh containers that did not provide a fire-resistance of at least one-half hour.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339418543.