Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MARTIN & BAYLEY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MARTIN & BAYLEY, INC. in 302 LEXINGTON AVE, CARMI, IL 62821 (NAICS 493110). OSHA activity number 339428724.

Watch Martin & Bayley, INC. — free Get an email when a new federal OSHA severe-injury report for Martin & Bayley, INC. is published. One employer, no account, unsubscribe in one click.
Site address
302 LEXINGTON AVE
City
CARMI
State
IL
ZIP
62821
Mailing
302 LEXINGTON AVE, CARMI, IL 62821
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
25
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1640.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards:     On or before 30 September, 2013, employees were exposed to fall hazards of 20 feet while working from a pallet resting on the forks of a Crown forklift.  The pallet did not have a guardrail system nor was the wood members on the floor designed to support employees.   Additionally, the platform did not indicate the maximum work load including personnel and equipment, the weight of the empty platform, or the minimum capacity of the truck on which the platform could be used in accordance with ANSI B56.1-2009, American National Standard for Low Lift and High Lift Trucks, Section 7.37.
Recent events (2)
  • — I (S) $1640
  • — Z (S) $2800

1910.305 B01 II

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2000.00 · Current $1160.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:       a)    North building, on the east  wall,  by the Cram-A-Lot bailer, the 220 volt electrical electrical panel box was missing the front panel that would cover the  current carrying electrical metal parts inside.
Recent events (2)
  • — I (S) $1160
  • — Z (S) $2000

1910.305 B02 I

Other-than-serious 1 instance 6 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(b)(2)(i):     All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear.     a)            North building, on the north wall by the Cram-A-Lot bailer, the 220 volt electrical junction box was missing its cover, exposing the inner electrical wiring connections.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View MARTIN & BAYLEY, INC.'s full OSHA safety record →

SPEEDX

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339428724.