Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JR WALKER ROOFING AND SIDING SERVICES

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of JR WALKER ROOFING AND SIDING SERVICES in 1106 BARTON CIRCLE, WILMINGTON, DE 19807 (NAICS 238160). OSHA activity number 339475568.

Watch JR Walker Roofing AND Siding Services — free Get an email when a new federal OSHA severe-injury report for JR Walker Roofing AND Siding Services is published. One employer, no account, unsubscribe in one click.
Site address
1106 BARTON CIRCLE
City
WILMINGTON
State
DE
ZIP
19807
Mailing
1409 N HARRISON ST APT 2, WILMINGTON, DE 19806
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2520.00 · Current $1890.00 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system.    a) 1108 Barton Circle, Wilmington DE 19807 (main house and garage roofs) - An employee working on roofs at a height of approximately eight and one-half feet above the ground was not protected from a fall hazard through the use of a fall protection system.  On or about  November 7, 2013.
Recent events (2)
  • — I (S) $1890
  • — Z (S) $2520

1926.503 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee exposed to fall hazards:    a) 1108 Barton Circle, Wilmington DE 19807 - An employee, exposed to a fall hazard from a height of approximately eight and one-half feet above the ground, did not receive training on the recognition of fall hazards and the procedures to be followed to minimize these hazards.  On or about November 7, 2013.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B05 I

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2520.00 · Current $1890.00 Reduced
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):      a) 1108 Barton Circle, Wilmington DE 19807 (ladder positioned against garage roof) - The horizontal distance from the top support to the foot of the aluminum ladder on which an employee was climbing was approximately 13.5 feet, more than one-quarter of the working length (approximately 16 feet) of this ladder.  An employee fell off this ladder and was impaled by a decorative metal fence post.   On or about November 7, 2013.
Recent events (2)
  • — I (S) $1890
  • — Z (S) $2520

1926.1060 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1060(a)(1): The employer did not provide training for each employee using ladders:    a) 1108 Barton Circle, Wilmington DE 19807 - An employee, exposed to a fall hazard while working from a ladder, was not trained to recognize hazards related to ladders nor trained in the procedures to be followed to minimize these hazards.  On or about November 7, 2013.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339475568.