Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SHAWMUT METAL PRODUCTS, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of SHAWMUT METAL PRODUCTS, INC. in 1914 G.A.R HIGHWAY, SWANSEA, MA 02777 (NAICS 331111). OSHA activity number 339487118.

Watch Shawmut Metal Products, INC. — free Get an email when a new federal OSHA severe-injury report for Shawmut Metal Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1914 G.A.R HIGHWAY
City
SWANSEA
State
MA
ZIP
02777
Mailing
1914 G.A.R HIGHWAY, SWANSEA, MA 02777
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331111
Employees
40
Ownership type
A

5 citations on file for this inspection.

1910.134 F02

Serious Gravity 5 5 instances 5 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1400.00 Reduced
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.  Employees who were wearing half-face negative pressure respirators did not pass fit tests on an annual basis.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.134 E01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  Location:  Worksite  Employees wore half-face negative pressure respirators and had not been provided with medical evaluations prior to use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.135 A01

Serious Gravity 5 1 instance 20 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $1750.00 Reduced
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects:   Location: Facility  Employees were operating overhead cranes to raise, lower, and move large structural steel beams and were not wearing protective helmets or hard hats.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.178 L04 III

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1400.00 Reduced
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:   Location: Worksite  The employer did not evaluate the forklift operators' performances every 3 years.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.178 Q07

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(q)(7): Powered industrial truck(s) were not examined for defects daily:  Location: Worksite  Employees were using forklifts that were not being inspected at least daily to detect defects that might affect the safety of their operation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View SHAWMUT METAL PRODUCTS, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339487118.