OSHA Inspection: JIMMY SMITH CABINETS, LLC

Issued

2014-03-14 00:00:00

Abate by

2014-03-20 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  (a) On or about 11/20/13 - at the Cutting area, the employer did not ensure that employees used appropriate eye protection when exposed to eye hazards from flying particles while operatiing the wood working saws and router.

Issued

2014-03-14 00:00:00

Abate by

2014-03-21 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  (a) On or about 11/20/13 - at the Cutting area, the saw blade above the table on the Delta Unisaw 10-in. Tilting Arbor Saw was not guarded when employees were ripping.

Issued

2014-03-14 00:00:00

Abate by

2014-03-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  (a) On or about 11/20/13 - at the Cutting area, the Delta Unisaw 10-in. Tilting Arbor Saw did not have a spreader when employees were ripping.

Issued

2014-03-14 00:00:00

Abate by

2014-03-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  (a) On or about 11/20/13 - at the Cutting area, the Delta Unisaw 10-in. Tilting Arbor Saw did not have nonkickback fingers or dogs when employees were ripping.

Issued

2014-03-14 00:00:00

Abate by

2014-03-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  (a) On or about 11/20/13 - at the Cutting area, the blade above the table on the Delta Unisaw 10-in. Tilting Arbor Saw was not guarded when employees were crosscutting.

Issued

2014-03-14 00:00:00

Abate by

2014-03-21 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with a cage or adjustable guard so designed so as to keep the operator's hand away from the cutting edge:  (a) On or about 11/20/13 - at the Cutting area, the Porter Cable Variable Speed Plunge Router installed in the router table did not have a cage or adjustable guard.

Issued

2014-03-14 00:00:00

Abate by

2014-05-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  (a) On or about 11/20/13 - at Spray Paint Building, the employer did not have a written respiratory protection program for employees who are required to wear a respirator while spray painting.