OSHA Inspection: SVIGELS AUTO PARTS

Issued

2014-03-06 00:00:00

Abate by

2014-03-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.  (a) On or about November 26, 2013, and at times prior, the employer did not ensure that floors and aisleways were clear and free of trip hazards.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2014-03-06 00:00:00

Abate by

2014-03-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points:   (a) On or about November 26, 2013, and at times prior, an aisleway leading to an exit was not maintained at a width of 28 inches wide due to items stored in the aisle on the floor.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2014-03-06 00:00:00

Abate by

2014-03-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  (a) On or about November 26, 2013, and at times prior, an exit door in the service shop was not marked with an "Exit" sign.     Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2014-03-06 00:00:00

Abate by

2014-04-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:  (a) On or about November 26, 2013, and at times prior, the employer did not ensure that flexible cords in the used parts workshop were connected in a manner that would reduce strain on the joints or terminal screws in the light fixtures.   Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2014-03-06 00:00:00

Abate by

2014-03-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein:  (a) On or about November 26, 2013, the employer did not ensure that containers of chemicals including motor oil and cleaning solvents were labeled.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").