OSHA Inspection: MASTER PURVEYORS

Issued

2014-03-14 00:00:00

Abate by

2014-03-26 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  (a) At the establishment employees are exposed to a amputation hazard while using a band saw to cut meat.  The guards on band saws (AEW and Biro) are not in position to protect employees on or about 1/29/2014.

Issued

2014-03-14 00:00:00

Abate by

2014-03-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.38(a): The emergency action plan required by 29 CFR1910.157(a) or (b) when the employer has elected to partially or totally evacuate the workplace in the event of a fire emergency, or required by 29 CFR1910.160(c)(1), did not cover the designated actions that the employer or employees must take to ensure employee safety from the fire and other emergencies:  (a) At the company employees are exposed to hazards such as but not limited to smoke inhalation, trips, slips or falls, in that, the employer does not have a written emergency action plan when employees fully evacuate in case of emergency, on or about 1/29/2014.

Issued

2014-03-14 00:00:00

Abate by

2014-04-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:   (a) At establishment employees perform material handling task with industrial fork trucks  are exposed to hazards such as but not limited to struck by equipment. Industrial truck / fork lift operators are not re-evaluated at required intervals on or about 1/29/2014.