Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: AM GROUP, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AM GROUP, INC. in 388 WOODLAWN, GLENCOE, IL 60022 (NAICS 238130). OSHA activity number 339568594.

Watch AM Group, INC. — free Get an email when a new federal OSHA severe-injury report for AM Group, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
AM GROUP, INC.
Site address
388 WOODLAWN
City
GLENCOE
State
IL
ZIP
60022
Mailing
3527 N. OTTAWA, CHICAGO, IL 60634
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
2
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $800.00 Reduced
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:     a) Employees were exposed to eye injury while operating a pneumatic nailer without the eye protection during roof sheathing work.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1400.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):          a) Employees were exposed to the hazard of falling while performing carpentry without the use of fall protection while on top of a two story building.           b) Employees were exposed to the hazard of falling where there were window and wall openings on the second story level of the building without fall protection.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1926.1053 B04

Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $1200.00 Reduced
29 CFR 1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:        a) Employees were exposed to the hazard of falling approximately 10 feet while climbing on a stepladder without its metal spreaders or locking devices in the open position.        b) Employees were exposed to the hazard of falling approximately 10 feet while using a stepladder for access and egress between two points on the second story of the building.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIV ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2400

1926.1053 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:   a) The top step of a stepladder was used as a step when the stepladder was used for access between two points on the second story of the building.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIV ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View AM GROUP, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339568594.