Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: EXPRESS COUNTER TOPS KITCHENS & FLOORING LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of EXPRESS COUNTER TOPS KITCHENS & FLOORING LLC in 110 NORTH PLAINS INDUSTRIAL ROAD, WALLINGFORD, CT 06492 (NAICS 238340). OSHA activity number 339570053.

Watch Express Counter Tops Kitchens & Flooring LLC — free Get an email when a new federal OSHA severe-injury report for Express Counter Tops Kitchens & Flooring LLC is published. One employer, no account, unsubscribe in one click.
Site address
110 NORTH PLAINS INDUSTRIAL ROAD
City
WALLINGFORD
State
CT
ZIP
06492
Mailing
110 NORTH PLAINS INDUSTRIAL ROAD, WALLINGFORD, CT 06492
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238340
Employees
16
Ownership type
A

11 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $500.00 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    Location: Machine Room, 110 North Plains Industrial Road, Wallingford, CT.    The walls in the machine area were covered with excessive mold and mildew and therefore were not kept in a clean and orderly/sanitary condition.
Recent events (2)
  • — I (O) $500
  • — Z (S) $2800

1910.22 A02

Other-than-serious 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.22(a)(2): Where wet processes were used, drainage was not maintained, and false floors, platforms, mats, or other dry standing places were not provided when practicable.     Location -  Finishing Room and Machine Room, 110 North Plains Industrial Road, Wallingford, CT.    The floor drainage system was not maintained while employees were engaged in using a wet processes such as but not limited to finishing granite and stone countertops.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.95 C01

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3430.00 Reduced
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:      Location -  Finishing Room, 110 North Plains Industrial Road, Wallingford, CT.      Finishing Department: The employer does not maintain an effective hearing conservation program (HCP) for the finishers who are exposed to continuous noise levels in excess of the allowable 8-hour Time Weighted Average (TWA) sound level of 85dbA.  This violation was observed on or about 2/24/14, where the noise the noise sampling period was 191 minutes indicated that employees were exposed to 96.69% noise dose which is equivalent to approximately 91.6 dbA.  Zero exposure was assured for the 289 not sampled. Inclusion in the HCP was not made available to the finishing department employees.
Recent events (2)
  • — I (S) $3430
  • — Z (S) $4900

1910.134 C03

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1050.00 Reduced
29 CFR 1910.134(c)(3): The employer did not designate a program administrator who was qualified by appropriate training or experience to administer or oversee the respiratory protection program and to conduct the required evaluations of program effectiveness.      Location -  Finishing Area and Machine Area, 110 North Plains Industrial Road, Wallingford, CT.     The respiratory protection program did not have a current designated program administrator.
Recent events (2)
  • — I (O) $1050
  • — Z (S) $2100

1910.134 K03

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace.    Location -  Finishing Area and Machine Area, 110 North Plains Industrial Road, Wallingford, CT.    Respirator training was not provided to employees who were required to wear half face, negative pressure, tight fitting respirators.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 E01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1050.00 Reduced
29 CFR 1910.134(e)(1): The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.       Location -  Finishing Area and Machine Area, 110 North Plains Industrial Road, Wallingford, CT.        A medical evaluation to determine each employee's ability to use a respirator before each employee's fit tested or prior to utilizing a respirator in the workplace was not conducted.
Recent events (2)
  • — I (O) $1050
  • — Z (S) $2100

1910.134 L01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(l)(1): Evaluations of the workplace were not conducted to ensure the written respiratory protection program was being effectively implemented.     Location - Finishing Area and Machine Area, 110 North Plains Industrial Road, Wallingford, CT    The written respiratory protection program had not been evaluated to ensure it was effectively implemented.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.1200 E01 I

Serious Gravity 1 1 instance 16 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1470.00 Reduced
29 CFR 1910.1200(e)(1)(i): The written hazard communication program did not include a list of the hazardous chemicals known to be present, using an identity that was referenced on the appropriate material safety data sheet.    Location -  Finishing Area and Machine Area, 110 North Plain Industrial Road, Wallingford, CT.    The hazardous chemicals list that was part of the company's hazard communication program was not complete in that it was missing chemicals such as but not limited to Propane and Bullet proof sealer.
Recent events (2)
  • — I (S) $1470
  • — Z (S) $2100

1910.1200 H01

Serious Gravity 5 1 instance 16 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   Location - Finishing Area and Machine Area, 110 North Plain Industrial Road, Wallingford, CT.   Information and training was not conducted at the time of each employee's initial assignment and whenever a new hazard was introduced into the workplace where employees were expected to use chemicals such as but not limited to Propane, Bullet Proof Sealer, acetone and polyester resins and hardeners.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 J01

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(j)(1): 29 CFR 1910.1200(j)(1):  The employer did not train employees regarding the new label elements and safety data sheets format by December 1,2013.     Location - Finishing Area and Machine Area, 110 North Plain Industrial Road, Wallingford, CT.  Employees were not trained in the new label elements and safety data format.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 D02

Other-than-serious 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done:   Location -  Finishing Area and Machine Area, 110 North Plains Industrial Road, Wallingford, CT.  The name of the person certifying the hazard assessment and the date the hazard assessment was completed was not included on the written workplace hazard assessment certification.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339570053.