Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: KEEN PUMP COMPANY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of KEEN PUMP COMPANY, INC. in 471 US ROUTE 250 E., ASHLAND, OH 44805 (NAICS 333911). OSHA activity number 339571200.

Watch Keen Pump Company, INC. — free Get an email when a new federal OSHA severe-injury report for Keen Pump Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
471 US ROUTE 250 E.
City
ASHLAND
State
OH
ZIP
44805
Mailing
471 US ROUTE 250 E., ASHLAND, OH 44805
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333911
Employees
30
Ownership type
A

3 citations on file for this inspection.

1910.303 B01

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1470.00 Reduced
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees:  a) Keen Pump Company, Inc. - Ashland, Ohio: On or about February 3, 2014, the employer did not assure that the flexible power cord that was wrapped around the Dayton #24-1 chain hoist (located on the I-beam labeled "K") was free from electrical hazards by assuring equipment was in good repair.  Employees were exposed to electrical hazards in that the cord's protective outer cover was being pulled from the plug end of the cord.
Recent events (2)
  • — I (S) $1470
  • — Z (S) $2100

1910.303 B02

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3430.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) Keen Pump Company, Inc. - Ashland, Ohio: On or about February 3, 2014, the employer did not assure that employees were protected from electrical hazards when operating the electrical test panel located in the assembly area to test pumps.  The employer installed an extension with alligator clips to test blocks, exposing employees to live parts up to 480 volts.  The test panel was not used in accordance with listing instructions in that pumps were not directly connected and secured to test blocks during the electrical test.
Recent events (2)
  • — I (S) $3430
  • — Z (S) $4900

1910.305 G01 IV A

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a) Keen Pump Company, Inc. - Ashland, Ohio: On or about February 3, 2014, an extension cord servicing the computer programmer associated with the Bridgeport machine (model F537; s/n 11550001), was used as a substitute for fixed wiring of a structure.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339571200.