WHITE OAK, TX —
OSHA Inspection: CHEROKEE STEEL FABRICATORS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CHEROKEE STEEL FABRICATORS, INC. in 2001 CHEROKEE TRACE, WHITE OAK, TX 75693 (NAICS 332312). OSHA activity number 339573248.
Where did this inspection happen?
- Establishment
- CHEROKEE STEEL FABRICATORS, INC.
- Site address
- 2001 CHEROKEE TRACE
- City
- WHITE OAK
- State
- TX
- ZIP
- 75693
- Mailing
- 2001 CHEROKEE TRACE, WHITE OAK, TX 75693
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 24
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.95 C01
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $800.00 Reduced
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average (TWA) sound level of 85 decibels measured on the A scale (dBA), or equivalently a dose of fifty percent: This violation occurred on or about February 19, 2014, when the employer had not administered a hearing conservation program for employees exposed to noise that exceeded an 8-hour TWA of 85 dBA: a. In the fit-up department, an employee was exposed to noise levels at 68.0% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 68.0% is approximately 87.2 dBA. Sampling was performed for 478 minutes during one shift. Zero exposure was assumed for the unsampled period of 2 minutes. b. In the fit-up department, an employee was exposed to noise levels at 68.51% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 68.51% is approximately 87.2 dBA. Sampling was performed for 477 minutes during one shift. Zero exposure was assumed for the unsampled period of 3 minutes. c. In the welding department, an employee was exposed to noise levels at 71.82% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 71.82% is approximately 87.6 dBA. Sampling was performed for 476 minutes during one shift. Zero exposure was assumed for the unsampled period of 4 minutes. d. In the clean-up department, an employee was exposed to noise levels at 68.53% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 68.53% is approximately 87.2 dBA. Sampling was performed for 480 minutes during one shift.
Recent events (2)
- — I (S) $800
- — Z (S) $2000
1910.132 A
- Issued
- Abate by
- Penalty
- Initial $2400.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, and maintained in a sanitary and reliable condition wherever it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact: This violation was discovered on or about February 19, 2014, in the truck loading department, where employees loading parts onto a trailer were exposed to fall hazards of approximately 5 feet and did not use a personal fall arrest system.
Recent events (2)
- — I (S) $0
- — Z (S) $2400
1910.178 L01 II
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $800.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck, the employer did not ensure that each operator had successfully completed the training required by 29 CFR 1910.178(l): This violation was discovered on or about February 19, 2014, when at least one forklift operator had not completed a training program consisting of a combination of formal instruction, practical training, and evaluation of the operator's performance in the workplace.
Recent events (2)
- — I (S) $800
- — Z (S) $2000
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $1100.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not be guarded: This violation was discovered on or about February 4, 2014, in the layout department, where at least one employee was exposed to point of operation hazards while using a press brake.
Recent events (2)
- — I (S) $1100
- — Z (S) $2800
More inspections at CHEROKEE STEEL FABRICATORS, INC.
Longview, TX—1982-09-23
CHEROKEE STEEL FABRICATORS INC
White Oak, TX—1980-12-17
CHEROKEE STEEL FABRICATORS INC
White Oak, TX—1980-11-04
CHEROKEE STEEL FABRICATORS INC
White Oak, TX—1980-10-02
CHEROKEE STEEL FABRICATORS INC
Longview, TX—1978-09-12
CHEROKEE STEEL FABRICATORS INC
View CHEROKEE STEEL FABRICATORS, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
CAMDEN, NJ—2026-07-08
CENTRAL METALS, INC.
SACRAMENTO, CA—2026-07-07
MARTIN'S STEEL WORKS, INC
LOUISVILLE, KY—2026-07-01
69275 - NORTH AMERICAN INDUSTRIAL SUPPLY INC
More inspections in TX
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
FORT WORTH, TX—2026-07-10
RC PROFESSIONAL ROOFING OF TEXAS LLC
CYPRESS, TX—2026-07-10
FEDERICO CARVAJAL GARCIA
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
SAN ANTONIO, TX—2026-07-09
WAREHOUSE RACK COMPANY, LP
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339573248.