OSHA Inspection: PAUMA CASINO

Issued

2014-04-17 00:00:00

Abate by

2014-06-04 00:00:00

Penalty

Initial $2550.00 · Current $1275.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc.:    In the facilities shop on or about March 7, 2014, and at times prior thereto, there was no guard for the chuck on a Ryobi 10 inch Drill Press, serial number 058563043. The drill press was used to drill holes steel metal for heating, ventilation and air conditioning work.

Issued

2014-04-17 00:00:00

Abate by

2014-04-25 00:00:00

Penalty

Initial $2550.00 · Current $1275.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rests were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage:    In the facilities shop on or about March 7, 2014, and at times prior thereto, the work rests on a Delta 8 inch Bench Grinder, model number 23840, were not adjusted to within one-eighth inch of the abrasive wheels. The work rest was three-fourths inch from the right wheel, and the other work rest was one-half inch from the left wheel. The grinder was used to sharpen tools.

Issued

2014-04-17 00:00:00

Abate by

2014-04-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b)(3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch:  In the facilities shop on or about March 7, 2014, and at times prior thereto, the tongue guard on a Delta 8 inch Bench Grinder, model number 23840, was not adjusted to within one-fourth inch of the abrasive wheel. The tongue guard was seven-eights inch from the left wheel. The grinder was used to sharpen tools.

Issued

2014-04-17 00:00:00

Abate by

2014-04-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving:  In the facilities shop on or about March 7, 2014, and at times prior thereto, the Delta 8 inch Bench Grinder, model number 23840, was not secured to the bench. The grinder was used to sharpen tools.

Issued

2014-04-17 00:00:00

Abate by

2014-04-25 00:00:00

Penalty

Initial $2550.00 · Current $1275.00 Reduced

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:    In the facilities shop on or about March 7, 2014, and at times prior thereto, the ground pin was missing on the plug that powered a Rigid band saw, model number B1400, serial number 0335E0065.

Issued

2014-04-17 00:00:00

Abate by

2014-06-04 00:00:00

Penalty

Initial $2550.00 · Current $1275.00 Reduced

General-duty citation text

29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points:    At the front door of the facilities shop on or about March 7, 2014, and at times prior thereto, extension cords were not protected from damage as they were pinched between the bottom of the door and the threshold for the door. The cord was used to power a 110 VAC charger for a golf cart.