OSHA Inspection: FPT FORT LAUDERDALE LLC

Issued

2014-04-11 00:00:00

Abate by

2014-04-17 00:00:00

Penalty

Initial $3000.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a. On or about March 11, 2014, at the mechanic shop of the above addressed jobsite, an employee was exposed to a chemical hazard while working with a corrosive chemical (i.e Alum-Brite, with a ph less than 1.0) without having an eyewash available in the event of an emergency.

Issued

2014-04-11 00:00:00

Abate by

2014-04-17 00:00:00

Penalty

Initial $5000.00 · Current $3750.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a.  On or about February 25, 2014, at the mechanic shop of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Delta, Model R9323) that lacked a guard on its point of operation.

Issued

2014-04-11 00:00:00

Abate by

2014-04-17 00:00:00

Penalty

Initial $3000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    a.  On or about March 11, 2014, at the mechanic shop of the above addressed jobsite, an employee was exposed to a struck by hazard while working with a drill press (i.e. Delta, Model R9323) that was not anchored.

Issued

2014-04-11 00:00:00

Abate by

2014-04-17 00:00:00

Penalty

Initial $4000.00 · Current $2400.00 Reduced

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:     a.  On or about February 11, 2013, at the mechanic shop of the above addressed jobsite, an employee was exposed to a struck by hazard while working with a bench grinder (i.e. no info available) that lacked a tongue guard on its right side.