OSHA Inspection: JESEL INC.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $3500.00 · Current $2625.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) Jesel Inc., Manufacturing area:  The employer did not conduct periodic inspection on the lockout/tagout procedures for machines such as: Air dryer, Bench press Baltec, Centerless grinder, CNC Mill Bridgeport EZ trac, Compressor #1, 2, 3 and 4, Hone 3 & 5, Horizontal Mill #1, 2, 3, 4, 5, 6, 7 & 8, CNC LA HAAS # 10 & 12, CNC LA the Nakamure tome #9 & 11, CNC LA the royal, CNC LA the & Barloader citizen #1, 2 & 3, CNC LA The & Barloader Mori seiki #1, 2, 3, 4, 5, 6, 7 & 8, Mill Bridgeport #1, 2 & 3, Parts washer #1, Roller Pin machine #1 & 2, sealing machine #1, shot peen machine #1 & 2, Shot peen dust collector #1 & 2, Vertical mill matsuura # 1, 2, 3, 4 & 8, vertical mill mori seiki #5 & 6, vertical mill HAAS # 7 & 9, Engine dyno #1, Tumbler Roto finish #1, 2, 5, 6 & 7, Tumbler sweco # 4,  occurred on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $2100.00 · Current $1575.00 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords were used as a substitute for the fixed wiring of a structure;  a)  Jesel Inc.- Testing cell: An extension cord was use in one of the enginees to be tested, observed on or about 03/11/2014.  b)  Jesel Inc. -Tumbling room: Extension cords were used to connect equipment, observed on or about 03/11/2014.  c) Jesel Inc. - Milling room:  Extension cords were used to connect equipment, observed on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii):   Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  a)  Jesel Inc. - Metal finishing:  The machine GS/UL model 3R320, S/N  39892106 had a damaged strain relief, observed on or about 03/11/2014.  b)  Jesel Inc. - Milling room:  The turbo conveyor machine model #6475-8663, S/N 321886 had a damaged strain relief, observed on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Forms or equivalent:  a) Jesel Inc, 1985 Cedar Bridge Avenue, Suite 2, Lakewood NJ: On or about March 11, 2014 the employer did not have a form used for recording injuries and illnesses equivalent to the OSHA 300, 301 and 300A forms for the calendar year 2011.  b) Jesel Inc, 1985 Cedar Bridge Avenue, Suite 2, Lakewood NJ: On or about March 11, 2014 the employer did not have a form used for recording injuries and illnesses equivalent to the OSHA 300, 301 and 300A forms for the calendar year 2012.  c) Jesel Inc, 1985 Cedar Bridge Avenue, Suite 2, Lakewood NJ:  On or about March 11, 2014 the employer did not have a form used for recording injuries and illnesses equivalent to the OSHA 300, 301 and 300A forms for the calendar year 2013.  d) Jesel Inc, 1985 Cedar Bridge Avenue, Suite 2, Lakewood NJ:  On or about March 11, 2014 the employer did not have a form used for recording injuries and illnesses equivalent to the OSHA 300, 301 and 300A forms for the calendar year 2014.

Issued

2014-05-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) Jesel Inc.: The Company forklift operators were not evaluated every three years in their ability to operate the powered industrial truck safely.  Occurred on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Jesel Inc., Manufacturing facility: The employer did not have a written hazard communication program for employees that handled chemicals such as but not limited to Roto brite L-980, brake cleaner, transmission fluid, WD-40, etc., on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:  a) Jesel Inc. - Milling area: Plastic bottles containing an unknown chemical were not labeled, observed on or about 03/11/2014.

Issued

2014-05-09 00:00:00

Abate by

2014-06-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a)  Jesel Inc., Manufacturing facility: The employer had not provided infomation and training to employees on chemicals they used in the workplace such as but not limited to ROTO brite L-980, brake cleaner, transmission fluid, WD40, etc., on or about 03/11/2014.