OSHA Inspection: JOE FAZIO'S BAKERY, INC

Issued

2014-08-06 00:00:00

Abate by

2014-08-18 00:00:00

Penalty

Initial $2100.00 · Current $1470.00 Reduced

General-duty citation text

29 CFR 1910.178(p)(1):   Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):   On or about 03/21/2014, the Yale forklift, Serial #E108V170727, Model #FRC0507GN48TE was being operated by employees with an inoperable horn.

Issued

2014-08-06 00:00:00

Abate by

2014-08-18 00:00:00

Penalty

Initial $2100.00 · Current $1470.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):   One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  On or about 03/21/2014, in the maintenance warehouse area, Craftsman Drill Press, illegible model/serial number, was being operated by an employee with an unguarded chuck and bit.

Issued

2014-08-06 00:00:00

Abate by

2014-08-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(b):   Machine(s) designed for a fixed location(s) were not securely anchored to prevent walking or moving:   At the maintenance warehouse  area, a Craftsman Drill Press, illegible model/serial numbers was not bolted or otherwise secured to prevent movement.

Issued

2014-08-06 00:00:00

Penalty

Initial $1785.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4):   Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  At the maintenance shop, the distance of the work rest to the abrasive wheel belonging to a Dayton 10" Bench Grinder, illegible serial #, was approximately 5/16 inch.

Issued

2014-08-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  On or about 03/21/2014, maintenance shop area, the distance of the tongue guard to the abrasive wheel belonging to a Dayton 10" Bench Grinder, illegible model/serial numbers, was approximately 3/8".