Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

SAINT LOUIS, MO —

OSHA Inspection: PLASTICS MOLDING COMPANY

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of PLASTICS MOLDING COMPANY in 4211 NORTH BROADWAY, SAINT LOUIS, MO 63147 (NAICS 333999). OSHA activity number 339648578.

Watch Plastics Molding Company — free Get an email when a new federal OSHA severe-injury report for Plastics Molding Company is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
PLASTICS MOLDING COMPANY
Site address
4211 NORTH BROADWAY
City
SAINT LOUIS
State
MO
ZIP
63147
Mailing
4211 NORTH BROADWAY, SAINT LOUIS, MO 63147

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
333999
Employees
46
Ownership type
A

Citations

3 citations on file for this inspection.

1910.147 C04 II B

Serious Gravity 1 18 instances 2 exposed
Issued
Abate by
Penalty
Initial $1418.00 · Current $993.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:  Inside the production area the specific Lockout/Tagout procedures for the following machines did not identify thermal energy:  a/  Injection Molding Machine Press# 38 - VAN DORN (Model Number:  170-RS-14F-HT, Lot 13, Serial Number:  438)   b/  Injection Molding Machine Press# 39 - VAN DORN (Model Number:  120-RS-8F-HT, Lot 11, Serial Number:  399)  c/  Injection Molding Machine Press# 44 - TOYO (Model Number:  TM-245H, Serial Number:  1226038)  d/  Injection Molding Machine Press# 45 - TOYO (Model Number:  TI-35H, Serial Number:  122201)  e/  Injection Molding Machine Press# 46 - TOYO (Model Number:  SI-200, Serial Number:  1243001)  f/  Injection Molding Machine Press# 47 - TOYO (Model Number:  SI-55, Serial Number:  1249013)  g/  Injection Molding Machine Press# 48 - TOYO (Model Number:  SI-150, Serial Number:  1242013)  h/  Injection Molding Machine Press# 49 - Toshiba (Model Number:  ISG390V10-19AT, Serial Number:  86301)  i/  Injection Molding Machine Press# 67 - Nissei (Model Number:  FN7000-100A, Serial Number:  S36R113)  j/  Injection Molding Machine Press# 68 - Nissei (Model Number:  FN6000-71a, Serial Number:  S28V028)  k/  Injection Molding Machine Press# 69 - Nissei (Model Number:  FN4000-36A, Serial Number:  S18U250)  l/  Injection Molding Machine Press# 70 - Nissei (Model Number:  FN2000-18A, Serial Number:  S11R257)  m/  Injection Molding Machine Press# 71 - Nissei (Model Number: FN2000-18A, Serial Number:  S11R240)  n/ Injection Molding Machine Press# 72 - Nissei (Model Number:  FN2000-18A, Serial Number:  S11R241)  o/  Injection Molding Machine Press# 73 - Toshiba (Model Number: EC390V21-17AT, Serial Number:  252)  p/  Injection Molding Machine Press# 74 - Toshiba (Model Number:  EC189V21-4A, Serial Number: 4501)  q/  Injection Molding Machine Press# 75 - Toshiba (Model Number:  ISG610V21-34B, Serial Number:  361610)  r/  Injection Molding Machine Press# 40 - Ferromatik Milacron (Model Number:  K250-S/2F, Serial Number:  551113)
Recent events (2)
  • — I (S) $992.6
  • — Z (S) $1418

1910.147 C06 I

Serious Gravity 1 18 instances 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  Inside the production area the specific procedures for the following were not certified annually at a minimum:  a/  Injection Molding Machine Press# 38 - VAN DORN (Model Number:  170-RS-14F-HT, Lot 13, Serial Number:  438)   b/  Injection Molding Machine Press# 39 - VAN DORN (Model Number:  120-RS-8F-HT, Lot 11, Serial Number:  399)  c/  Injection Molding Machine Press# 44 - TOYO (Model Number:  TM-245H, Serial Number:  1226038)  d/  Injection Molding Machine Press# 45 - TOYO (Model Number:  TI-35H, Serial Number:  122201)  e/  Injection Molding Machine Press# 46 - TOYO (Model Number:  SI-200, Serial Number:  1243001)  f/  Injection Molding Machine Press# 47 - TOYO (Model Number:  SI-55, Serial Number:  1249013)  g/  Injection Molding Machine Press# 48 - TOYO (Model Number:  SI-150, Serial Number:  1242013)  h/  Injection Molding Machine Press# 49 - Toshiba (Model Number:  ISG390V10-19AT, Serial Number:  86301)  i/  Injection Molding Machine Press# 67 - Nissei (Model Number:  FN7000-100A, Serial Number:  S36R113)  j/  Injection Molding Machine Press# 68 - Nissei (Model Number:  FN6000-71a, Serial Number:  S28V028)  k/  Injection Molding Machine Press# 69 - Nissei (Model Number:  FN4000-36A, Serial Number:  S18U250)  l/  Injection Molding Machine Press# 70 - Nissei (Model Number:  FN2000-18A, Serial Number:  S11R257)  m/  Injection Molding Machine Press# 71 - Nissei (Model Number: FN2000-18A, Serial Number:  S11R240)  n/ Injection Molding Machine Press# 72 - Nissei (Model Number:  FN2000-18A, Serial Number:  S11R241)  o/  Injection Molding Machine Press# 73 - Toshiba (Model Number: EC390V21-17AT, Serial Number:  252)  p/  Injection Molding Machine Press# 74 - Toshiba (Model Number:  EC189V21-4A, Serial Number: 4501)  q/  Injection Molding Machine Press# 75 - Toshiba (Model Number:  ISG610V21-34B, Serial Number:  361610)  r/  Injection Molding Machine Press# 40 - Ferromatik Milacron (Model Number:  K250-S/2F, Serial Number:  551113)
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 B

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1418.00 · Current $993.00 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  a/ Inside the tooling and printing department the Baldor Pedestal Abrasive Wheel Grinder (CAT Number:7307 A32/84, Serial Number: W1282) was not anchored to the floor.
Recent events (2)
  • — I (S) $992.6
  • — Z (S) $1418

More inspections in this industry (NAICS 333999)

More inspections in MO

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339648578.