OSHA Inspection: EXPRESS AUTO SERVICES, LLC

Issued

2014-07-21 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $2380.00 · Current $1428.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    (a) On or about 3/28/14 - Maintenance Pit, a bench-mounted grinder did not have tool rest(s) adjusted to within 1/8th of an inch of the wheel.

Issued

2014-07-21 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  (a) On or about 3/28/14 - Maintenance Pit, a bench-mounted grinder did not have a tongue guard.

Issued

2014-07-21 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $1785.00 · Current $1071.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    (a) On or about 03/28/14 - Office, three re-locatable power taps (RPT) were being used to extend branch circuits of the facility.

Issued

2014-07-21 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":   (a) On 3/28/14 - Mechanic Bay, there was no exit sign at the doorway leading to the outside.

Issued

2014-07-21 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(2): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:       (a)    On or about 3/28/14 -  Break room, a 110-volt branch circuit receptacle was missing the faceplate.   (b)    On or about 3/28/14 - Office, a 110-volt branch circuit receptacle was missing the faceplate.