OSHA Inspection: CENTRAL MAINE HARLEY DAVIDSON, INC.

Issued

2014-05-07 00:00:00

Abate by

2014-05-19 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent):   Shop - The motorcycle storage area, nine feet above the floor, was not provided with standard railings.

Issued

2014-05-07 00:00:00

Abate by

2014-05-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate:  Shop - The approved floor load for the motorcycle storage area was not marked on a plate.

Issued

2014-05-07 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $1200.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):    Shop - The employer did not assess the workplace to determine if hazards are present which necessitate the use of personal protective equipment (PPE).

Issued

2014-05-07 00:00:00

Abate by

2014-05-15 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts:  Shop - The Craftsman drill press was not equipped with a chuck guard.

Issued

2014-05-07 00:00:00

Abate by

2014-05-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  Shop - The Craftsman drill press was not mounted to the floor.

Issued

2014-05-07 00:00:00

Abate by

2014-05-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(c)(3): Vertical or inclined shafting seven (7) feet or less from floor or working platform was not enclosed with stationary casing(s):  Shop - The shaft on the motor of the Craftsman drill press was not guarded.

Issued

2014-05-07 00:00:00

Abate by

2014-05-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Shop - The pulley on the Craftsman drill press was not guarded.

Issued

2014-05-07 00:00:00

Abate by

2014-05-27 00:00:00

Penalty

Initial $2400.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1910.242(a): Equipment was not kept in safe condition:  In the following instances equipment was not maintained in a safe condition:  a) Shop - The garage door contained a bent track, dislodged roller, and was propped open with a pipe. b) Shop - Two Handy Air Lifts were not equipped with foot pedals. c) Shop - Handy Air Lift 95505 was operated with a damaged air hose.

Issued

2014-05-07 00:00:00

Abate by

2014-07-31 00:00:00

Penalty

Initial $1200.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):    Shop - The employer did not develop a written hazard communication program.