Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: STAFFING PRIORITIES, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of STAFFING PRIORITIES, LLC in 1 LEGGETT DRIVE, SOCIAL CIRCLE, GA 30025 (NAICS 561320). OSHA activity number 339755142.

Watch Staffing Priorities, LLC — free Get an email when a new federal OSHA severe-injury report for Staffing Priorities, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1 LEGGETT DRIVE
City
SOCIAL CIRCLE
State
GA
ZIP
30025
Mailing
1160 OLD PEACHTREE ROAD, DULUTH, GA 30097
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561320
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.36 D01

Other-than-serious 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $0.00 Reduced
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge.    On or about 4/16/14, in the production area, an emergency exit door was equipped with a dead bolt lock.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $0
  • — Z (S) $3000

1910.212 A01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4000.00 · Current $3000.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by rotating parts.    On or about 4/16/14, at Line 1 in the production area, employees were exposed to rotating parts, at the filler and capper of Line 1, as the locations were not guarded.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $3000
  • — Z (S) $4000

1910.305 G01 IV A

Deleted Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $0.00 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.  On or about 4/16/14, at the wax line in the production area, temporary electrical extension cords were used to power heat guns on the Wax Line on a permanent basis.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $3000

1910.1200 E01

Other-than-serious 1 instance 31 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $3000.00
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.    On or about 4/16/14, at the Social Circle facility, the employer did not implement a written hazard communication program and instead only provided safety data sheets for chemicals, such as but not limited to Sodium Hypochlorite and BCS Sodium Hydroxide liquid, used by employees.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $3000
  • — Z (S) $3000

1910.1200 H03

Serious Gravity 1 1 instance 31 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv).  On or about 4/16/14, at the Social Circle facility, the employer did not perform hazard communication training to employees working in the production area. Chemicals used in production include corrosives such as Sodium Hypochlorite and BCS Sodium Hydroxide liquid.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

AEROTEK

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339755142.