STRATFORD, CT —
OSHA Inspection: JANUSZ HOME REPAIR LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JANUSZ HOME REPAIR LLC in 500 PROSPECT DRIVE, STRATFORD, CT 06615 (NAICS 238160). OSHA activity number 339770687.
Where did this inspection happen?
- Establishment
- JANUSZ HOME REPAIR LLC
- Site address
- 500 PROSPECT DRIVE
- City
- STRATFORD
- State
- CT
- ZIP
- 06615
- Mailing
- 46 PLASKON DRIVE, SHELTON, CT 06484
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1200.00 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents. WORKSITE: The employees performing roofing and framing activities with the following equipment were not wearing eye protection: 1) The Rigid handheld circular saw 2) The DeWalt model DW745 portable table saw 3) Pneumatic nailing devices
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.304 H01
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $1400.00 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (i)(1) of this section for hoods for circular ripsaws. WORKSITE: The blade guard on the DeWalt model DW745 portable table saw, serial number 2013 38-CT 270175 was missing.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1926.501 B13
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $1500.00 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. WORKSITE: The employees performing roofing work on the eave and rake edge of the house were not protected against falling 9 feet, 10 inches by the use of appropi\riate fall protection system(s).
Recent events (2)
- — I (S) $1500
- — Z (S) $2800
1926.503 A01
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1200.00 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. WORKSITE: The employees performing roofing activities were not provided with information and training in the hazards associated with falls or the procedures necessary to eliminate or minimize those hazards.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.1060 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1060(a): The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards. WORKSITE: The employees using ladder in the performance of their work were not provided with information and training in the hazards associated with ladders or the procedures necessary to eliminate or minimize those hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Abate by
- Penalty
- Initial $2000.00 · Current $1200.00 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support. WORKSITE: The Werner model D1520-2 aluminum extension ladder, used by employees to access the roof did not extend above the roof at least three (3) feet and no handhold or equivalent was provided.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
More inspections in this industry (NAICS 238160)
FAIRVIEW, TN—2026-07-16
MARVIN PINERA
CARSON CITY, NV—2026-07-16
UNKNOWN/INVALID ESTABLISHMENT
BANNOCKBURN, IL—2026-07-16
ROOFING H.P. LLC
LOXLEY, AL—2026-07-16
CARLOS CHE
BALTIMORE, MD—2026-07-16
VAL CONSTRUCTION INC
More inspections in CT
ENFIELD, CT—2026-07-16
MOMS ENFIELD
DAYVILLE, CT—2026-07-16
HARBOR FREIGHT
NEW BRITAIN, CT—2026-07-14
JANANII, LLC
NEWINGTON, CT—2026-07-14
TRUSS MANUFACTURING INC
NORTH BRANFORD, CT—2026-07-14
NYK STATEWIDE MOLINA CONSTRUCTION LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339770687.