OSHA Inspection: WEST FRASIER, INC.

Issued

2014-09-15 00:00:00

Abate by

2014-09-19 00:00:00

Penalty

Initial $2700.00 · Current $1620.00 Reduced

General-duty citation text

29 CFR 1910.157(c)(1): 29 CFR 1910.157(c)(1):  Portable Fire Extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  Mobil Shop:  On or about May 22, 2014, the employer did not ensure that fire extinguisher signs were mounted over four (4) portable fire extinguishers located throughout the shop so that the extinguishers were readily accessible to the employees.

Issued

2014-09-15 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:  Mobil Shop:  On about May 22, 2014, the employer did not ensure that the portable fire extinguishers throughout the shop were visibly inspected.  The extinguishers were last inspected in March 2014.

Issued

2014-09-15 00:00:00

Abate by

2014-10-08 00:00:00

Penalty

Initial $3600.00 · Current $2160.00 Reduced

General-duty citation text

29 CFR 1910.219(c)(4)(i): Unguarded projected shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft.   Saw Mill Area:  On or about May 22, 2014, the employer did not guard the rotating tail spool on the ideal roller for the line conveyor.

Issued

2014-09-15 00:00:00

Abate by

2014-09-19 00:00:00

Penalty

Initial $2700.00 · Current $1620.00 Reduced

General-duty citation text

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  Lug Loader Area:  On or about May 22, 2014, the breakers in a 220 volt panel were not legibly marked to indicate its purpose.    Boiler Room:  On or about May 22, 2014, the breakers in a 120 volt panel along the east wall was not legibly marked to indicate its purpose.

Issued

2014-09-15 00:00:00

Abate by

2014-09-19 00:00:00

Penalty

Initial $2700.00 · Current $1620.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  Shop area:  On or about May 22, 2014, the employer did not ensure that the pathway to the breaker panels were kept clear for sufficient access.

Issued

2014-09-15 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $4500.00 · Current $2160.00 Reduced

General-duty citation text

29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed:    On or about May 22, 2014, breaker caps were missing in the in the electrical panels in the following areas:    a)  loader area - 2 breaker caps missing.  b)  boiler room - east wall, 4 breaker caps missing.  c)  boiler room - south wall, 5 breaker caps missing.