Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PICCONE ACQUISITION CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PICCONE ACQUISITION CORP. in 2365 BROAD HOLLOW RD, FARMINGDALE, NY 11735 (NAICS 238140). OSHA activity number 339848293.

Watch Piccone Acquisition Corp. — free Get an email when a new federal OSHA severe-injury report for Piccone Acquisition Corp. is published. One employer, no account, unsubscribe in one click.
Site address
2365 BROAD HOLLOW RD
City
FARMINGDALE
State
NY
ZIP
11735
Mailing
1815 BROADHOLLOW ROAD SUITE B, FARMINGDALE, NY 11735
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.95 A

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $900.00 Reduced
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact.  a) worksite - An employee using a reciprocating saw to cut I-Bolts from a building was not wearing eye protection; on or about 07/14/2014.   Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1926.451 C02 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1500.00 Reduced
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  Worksite - An employees was cutting I-Hooks off a building approximately 10 feet 6 inches from the bucket of a caterpillar TH255 Telehandler; on or about 07/14/2014  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2000

1926.602 C01 VIII A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.602(c)(1)(viii)(A): A safety platform was not firmly secured to the lifting carriage and/or forks.  a) Worksite - An employees was cutting I-Hooks off a building approximately 10 feet 6 inches from the bucket of a caterpillar TH255 Telehandler; on or about 07/14/2014  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01 VII

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1500.00 Reduced
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.  a) worksite - An employee cutting I-Bolts from a Caterpillar TH255 bucket approximately 10 feet 6 inches above the ground was not using fall protection; on or about 07/14/2014.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339848293.