OSHA Inspection: ALPINE CLEAN FOOD, INC.

Issued

2014-12-02 00:00:00

Abate by

2014-12-29 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death and/or serious physical harm to employees:  a) The employer did not ensure and/or enforce the use of seat belts while operating powered industrial trucks.  Note: Abatement certification and documentation ARE required for this item.

Issued

2014-12-02 00:00:00

Abate by

2014-12-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a)      The employer authorized and/or directed employees to operate powered industrial trucks.   Note: Abatement certification and documentation IS required for this item.

Issued

2014-12-02 00:00:00

Abate by

2014-12-29 00:00:00

Penalty

Initial $2000.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment would be isolated from the energy source and rendered inoperative.  (a)  Compressor Room, Mixing room and processing equipment that includes but is not limited to conveyors, belts, pulleys, compressors.     Note:  Abatement certification AND documentation ARE required for this item.

Issued

2014-12-02 00:00:00

Abate by

2014-12-29 00:00:00

Penalty

Initial $1200.00 · Current $840.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):   (a)     July 10, 2014, two solid pulleys located less than seven feet above the floor were not adequately guarded.  Note: Abatement certification IS required for this item.

Issued

2014-12-02 00:00:00

Abate by

2014-12-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(3): 29 CFR 1910.219(e)(3): Vertical and inclined belts were not enclosed by a guard conforming to the standards in paragraphs specified in 29 CFR 1910.219(m) and (o):  a.  Grain Mix area:  On or about July 10, 2014, the bread mixer had an upper and lower nclined belt in need of a guard.   Note: Abatement certification IS required for this item.