Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ALTRA INDUSTRIAL MOTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALTRA INDUSTRIAL MOTION in 2000 CLOVIS R BARKER ROAD, SAN MARCOS, TX 78666 (NAICS 333613). OSHA activity number 339850570.

Watch Altra Industrial Motion — free Get an email when a new federal OSHA severe-injury report for Altra Industrial Motion is published. One employer, no account, unsubscribe in one click.
Site address
2000 CLOVIS R BARKER ROAD
City
SAN MARCOS
State
TX
ZIP
78666
Mailing
2000 CLOVIS R BARKER ROAD, SAN MARCOS, TX 78666
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333613
Employees
106
Ownership type
A

5 citations on file for this inspection.

1910.178 L04 III

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $500.00 Reduced
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years.    On or about 15 July 2014, and at times prior thereto, three employees who utilize the forklift had not been retrained within the last three years to determine their operating skills and validate their being able to operate the forklift, exposing them and those employees working around them to the hazard of being struck by the forklift.
Recent events (2)
  • — I (O) $500
  • — Z (S) $3000

1910.212 A03 II

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $1500.00 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s).    On or about 15 July 2014, and at times prior thereto, a Jet Drill Press was utilized by employees without the use of a guard at the point of operation, exposing the employees to being caught in the drill and an amputation or impalement hazard.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $3000

1910.212 B

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving.   On or about 15 July 2014, and at times prior thereto, a Jet Drill Press was utilized by employees without the base being secured to the floor, exposing the employees to the hazard of being struck by the press falling over.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 1 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $1000.00 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 pounds per square inch (psi).    On or about 15 July 2014, and at times prior thereto, five maintenance workers were allowed to use compressed air to clean off their workstations on a daily basis that was at approximately 78 psig, exposing the workers to the hazard of being struck by flying objects or debris.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3000

1910.305 B02 I

Other-than-serious 1 instance 3 exposed
Issued
Penalty
Initial $2550.00 · Current $500.00 Reduced
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy.    On or about 15 July 2014, and at times prior thereto, the employer allowed the use of an electrical outlet that had a damaged faceplate with exposed energized parts, exposing the employees using the outlet to an electrical hazard of approximately 120 volts.
Recent events (2)
  • — I (O) $500
  • — Z (S) $2550

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339850570.