OSHA Inspection: AMAYA CUSTOM CABINETS, LLC

Issued

2014-10-24 00:00:00

Abate by

2014-11-08 00:00:00

Penalty

Initial $3500.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:  Manufacturing Area of Facility: On or about July 22, 2014, employees were exposed to explosion, deflagration and/or fire hazards as a result of the accumulation of combustible dust on horizontal and vertical surfaces, where electrical junction boxes, ducts, and structural members of the facility were covered by combustible saw dust measuring from approximately 1/16 inch to 1-1/2 inches.

Issued

2014-10-24 00:00:00

Abate by

2014-11-08 00:00:00

Penalty

Initial $2100.00 · Current $1260.00 Reduced

General-duty citation text

29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:    Door Sanding Area, West Side: On or about July 29, 2014, employee(s) who perform wooden cabinet door sanding tasks were exposed to chemical hazards from the application of Famowood Original Wood Filler, which contained skin irritants and permeators, including 5-10% Methyl Ethyl Ketone and 5-10% Acetone, without the use of personal protective equipment, such as chemical resistant gloves.

Issued

2014-10-24 00:00:00

Abate by

2014-10-30 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    Special Products Area, South side: On or about July 22, 2014, and times prior there to, employee(s) were exposed to struck-by and caught-in hazards from an unanchored Jet Drill Press 14 inch (Model: JDP 14JF, SN: 9051059), which was used for wood working processes.

Issued

2014-10-24 00:00:00

Abate by

2014-11-08 00:00:00

Penalty

Initial $3500.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:   Manufacturing Area, Office Roof top, west side: On or about July 22, 2014, the employer did not ensure that electrical junction boxes which were associated with fluorescent lighting that utilized Class P, Outdoor Type 1, Type HL (120V to 277 Volt) ballasts, were fully closed to prevent hazards  from ignition sources such as those posed by the accumulation of combustible saw dust.