Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: TOMPKINS METAL FINISHING INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TOMPKINS METAL FINISHING INC. in 6 APOLLO DRIVE, BATAVIA, NY 14020 (NAICS 332813). OSHA activity number 339874455.

Watch Tompkins Metal Finishing INC. — free Get an email when a new federal OSHA severe-injury report for Tompkins Metal Finishing INC. is published. One employer, no account, unsubscribe in one click.
Site address
6 APOLLO DRIVE
City
BATAVIA
State
NY
ZIP
14020
Mailing
6 APOLLO DRIVE, BATAVIA, NY 14020
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
80
Ownership type
A

4 citations on file for this inspection.

1910.132 A

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $4620.00 · Current $3000.00 Reduced
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:    a) Plating lines - On or about 7/30/14, the employer did not require employees to wear aprons or arm length gloves when working with highly corrosive materials such as, but not limited to, 98% sulfuric acid.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4620

1910.132 D01

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE)  a) Throughout Facility - On or about 7/30/14, the employer did not properly assess the workplace in order to determine if there were hazards likely to be present, while working on the plating lines, which would require personal protective equipment.  Employees working on the plating lines work with concentrated acids such as 98% sulfuric acid and are not required to wear face shields, arm length rubber gloves, or aprons.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.133 A01

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.133(a)(1): Protective face equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment:  a) Plating lines - On or about 7/30/14, the employer did not require employees to wear face shields when working with highly corrosive materials such as, but not limited to, 98% sulfuric acid.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.29 B01

Other-than-serious 1 instance 65 exposed
Issued
Abate by
Penalty
Initial $770.00 · Current $500.00 Reduced
29 CFR 1910.1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent), was not completed in detail as required by the regulation:    a) Office - On or about 7/30/14, the OSHA 300 log for 2014 contained the following deficiencies:        1) Case #4 was recorded as an injury involving days away from work, but the number of days away was not recorded.        2) Case #5 was recorded as an injury involving days away from work, but the number of days away was not recorded.        3) Case #6 was recorded as an injury involving days away from work, but the number of days away was not recorded.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $500
  • — Z (O) $770

View TOMPKINS METAL FINISHING INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339874455.