BIRMINGHAM, AL —
OSHA Inspection: WALPAR, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WALPAR, LLC in 4200 JEFFERSOSN AVENUE SW, BIRMINGHAM, AL 35211 (NAICS 332312). OSHA activity number 339875643.
Where did this inspection happen?
- Establishment
- WALPAR, LLC
- Site address
- 4200 JEFFERSOSN AVENUE SW
- City
- BIRMINGHAM
- State
- AL
- ZIP
- 35211
- Mailing
- P. O. BOX 28650, BIRMINGHAM, AL 35228
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 56
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $0.00 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards: (a) On or about 07/30/14 - Outside yard, a safety latch was not provided for the hoisting equipment at the 10 ton overhead crane.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.179 N02 I
- Issued
- Abate by
- Penalty
- Initial $4900.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.179(n)(2)(i): Hoist chain(s) or hoist rope(s) were wrapped around the load(s): (a) On or about 07/30/14 - Receiving, the 3/8" hoist chain used for lifting steel was wrapped around the load.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $3500.00
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: (a) On or about 07/30/14 - Shop Area, a guard was not provided for the unused portion of the 1.5 inch saw blade on the hem saw.
Recent events (2)
- — I (S) $3500
- — Z (S) $3500
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) On or about 07/31/14 - Fabrication, a guard was not provided for the 15 inch chuck head at the LeBlond lathe machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 332312)
WYOMING, MI—2026-07-16
R&M FABRICATION LLC
TRUSSVILLE, AL—2026-07-16
ALL SOUTH STEELWORX, LLC
NORTH BRANCH, MN—2026-07-15
111603 - BROWN HAWK LLC DBA NORTHERN LIGHTS STEEL FAB
VAN BUREN, AR—2026-07-14
MILLAR PARTNERS, LLC
CLANTON, AL—2026-07-14
C & S CANOPY, INC.
More inspections in AL
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
LOXLEY, AL—2026-07-16
CARLOS CHE
TRUSSVILLE, AL—2026-07-16
ALL SOUTH STEELWORX, LLC
CLANTON, AL—2026-07-14
C & S CANOPY, INC.
BIRMINGHAM, AL—2026-07-14
SCHOLAR CRAFT PRODUCTS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339875643.