Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: HUTCHERSON CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HUTCHERSON CONSTRUCTION, INC. in 8541 DAVIS BLVD, NORTH RICHLAND HILLS, TX 76182 (NAICS 236220). OSHA activity number 339877375.

Watch Hutcherson Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Hutcherson Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
8541 DAVIS BLVD
City
NORTH RICHLAND HILLS
State
TX
ZIP
76182
Mailing
1020 HARRISON AVENUE, ARLINGTON, TX 76011
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
16
Ownership type
A

3 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  On or about July 31, 2014, at a commercial steel erection project, the site Project Superintendent directing the work did not ensure that he and the workers engaged in welding activities were protected from unprotected fall hazards:  a) where there was a break in elevation of 19 inches from the second story landing to the upper landing surface; b) guard rails were not installed on the second story landing; c) mid-rails were not installed on the top upper landing area; and d) workers worked outside of the guardrails hanging on by one hand and welding.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1926.760 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:  On or about July 31, 2014, an employee on the rooftop of a steel erection construction project working with a grinder marking welding points and performing grinding work was not protected from fall hazards. The employee was exposed to a fall hazard of more than (6) feet to the ground below.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1926.1051 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided:   On or about July 31, 2014, at a steel erection construction project, an employee performing grinding work was not provided with a stairway or ladder where there was a break in elevation of approximately 4 feet from the awning to the roof top exposing the employee to fall hazards.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339877375.