Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WHITEHILL MANUFACTURING

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of WHITEHILL MANUFACTURING in 2540 GREEN ST, CHESTER, PA 19013 (NAICS 314991). OSHA activity number 339879868.

Watch Whitehill Manufacturing — free Get an email when a new federal OSHA severe-injury report for Whitehill Manufacturing is published. One employer, no account, unsubscribe in one click.
Site address
2540 GREEN ST
City
CHESTER
State
PA
ZIP
19013
Mailing
2540 GREEN ST, CHESTER, PA 19013
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
314991
Employees
32
Ownership type
A

8 citations on file for this inspection.

1910.37 A03

Serious Gravity 5 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $2100.00 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:    a) Buidling E - A designated fire exit route was obstructed by spools, boxes, and supplies that prevented employees from safe egress in case of a fire emergency. Condition observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

1910.110 F02 II

Serious Gravity 5 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $2100.00 Reduced
29 CFR 1910.110(f)(2)(ii): Liquefied petroleum gas container(s) stored inside were located near exits, stairways, or in areas normally used or intended for the safe exit of people:    a) Building A - Liquefied petroleum gas was stored near an area of safe egress exposing employees to fire hazards in the event of an emergency. Condition observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

1910.212 A01

Serious Gravity 10 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2940.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Building F, Catepillar Capstand - The employer did not utilize one or more methods of machine guarding to protect employees from ingoing nip points and rotating parts.  Conditions observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

1910.219 B01

Serious Gravity 10 4 instances 32 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2940.00 Reduced
29 CFR 1910.219(b)(1): Flywheels. Flywheels located so that any part is seven (7) feet or less above floor or platform shall be guarded in accordance with the requirements of this subparagraph:    1) Jobsite: The employer did not provide one or more methods of machine guarding to protect employees from Flywheels rotating approx. 2 feet from the ground, thus exposing employees to amputation hazards including, but not limited to the following locations:    a). Building E, Green Barth Machine, North end of building.  b). Building E, Green Barth Machine, Middle of building.   c). Building E, Green Barth Machine, South end of building.   d). Building A, 36 Head Rope Machine.    Conditions observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

1910.219 C02 I

Serious Gravity 5 1 instance 16 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:    a) Building A, 36-head machine - The employer did not ensure that the moving horizontal shaft located on the backside of the 36-head machine was protected by a stationary casing.  The adjacent walkway is used by employees traveling to the lavatory, water cooler, foreman office and timecard clock-in area. Condition observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 10 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2940.00 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven 7 feet or less above floors or platforms were not enclosed.    1) Jobsite: The employer did not provide one or more methods of machine guarding to protect employees from rotating sprocket wheels and chains including, but not limited to the following locations:    a) Building E, South End, Blue Feeder Rolls, Side Chain  b) Building E, South End, Blue Feeder Rolls, Bottom Drive Chain    Conditions observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

1910.253 B04

Serious Gravity 5 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $2100.00 Reduced
29 CFR 1910.253(b)(4): Oxygen cylinders were stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders:    a) Building A, Entrance - Oxygen, acetylene and propane were stored in close proximity to each other exposing employees to fire hazards.  Condition observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

1910.303 B02

Serious Gravity 5 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    a) Building F, Refrigerator Area - A wall outlet box was not installed in accordance to its listing and labeling exposing employees to electrical hazards.  Condition observed on or about 01 AUG 2014.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339879868.