OSHA Inspection: JOHNSON BROTHERS LIQUOR CO. OF FLORIDA

Issued

2014-08-26 00:00:00

Penalty

Initial $3500.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. At the establishment, employees were exposed to an amputation hazard, in that, while using the Rockwell Model 11 drill press no cup guard was present, on or about 08/07/2014

Issued

2014-08-26 00:00:00

Penalty

Initial $3500.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  a. At the establishment, employees were exposed to a caught in hazard, in that, while using the Rockwell Model 11 drill press the spindle pulleys were not guarded during operation, on or about 08/07/2014

Issued

2014-08-26 00:00:00

Penalty

Initial $3500.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at leastone- half hour.  a. At the site, employees were exposed to an explosion hazard, in that, xygen cylinders and acetylene gas cylinders were stored chained together with no barrier. on or about 08/07/2014.

Issued

2014-08-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:  a. At the site, the employer did not have a written assessment of the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE).

Issued

2014-08-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a. At the site, employees were exposed a caught in hazard, in that, there was no written lock out/tag out procedures to control stored electrical and pneumatic energy on the conveyor system parts P-1 to P-24, on or about 08/07/2014.  b.At the site, employees were exposed a caught in hazard, in that, there was no written lock out tag /out procedures to control stored electrical energy on the Wrapper Cousing Model 4100-45-OHA- P 25, on or about 08/07/2014