OSHA Inspection: EASY CUSTOM FRAMING

Issued

2014-11-10 00:00:00

Abate by

2014-11-21 00:00:00

Penalty

Initial $1600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  This violation occurred on August 13, 2014, at a workplace located at 2820 Almanzor Ave., TX 75062; where at least five (5) employees, who were working at various elevations under construction activities, were not protected from head injuries by wearing hard hats.

Issued

2014-11-10 00:00:00

Abate by

2014-11-21 00:00:00

Penalty

Initial $2800.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide:  This violation occurred on August 13, 2014, at a workplace located at 2820 Almanzor Ave., TX 75062; where at least four(4) employees, who was working from job-made scaffold platforms 10-inches wide, were exposed to the hazard of falling to the ground below.

Issued

2014-11-10 00:00:00

Abate by

2014-11-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  This violation occurred on August 13, 2014, at a workplace located at 2820 Almanzor Ave., TX 75062; where at least four(4) employees, who was working from job-made scaffold platforms more than 10 feet above a lower level, were not protected from falling to the ground below.