OSHA Inspection: PRIME TUCKPOINTING & MASONRY, INC.

Issued

2014-10-31 00:00:00

Abate by

2014-11-13 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1926.100(a):  Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets:    a)  Employees engaged in hoisting operations exposed to struck-by hazards were not wearing hard hats.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2014-10-31 00:00:00

Abate by

2014-11-13 00:00:00

Penalty

Initial $2800.00 · Current $1408.00 Reduced

General-duty citation text

29 CFR 1926.451(b)(1):  Each platform on all working levels was not fully planked or decked between front uprights and the guardrail supports:        a)  Employees working from frame scaffolding were exposed to fall hazards of approximately 24.6 where the scaffold platform was not fully decked.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2014-10-31 00:00:00

Abate by

2014-11-13 00:00:00

Penalty

Initial $2800.00 · Current $1408.00 Reduced

General-duty citation text

29 CFR 1926.451(g)(1):  Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:      a)  Employees working from frame scaffolding were exposed to fall hazards of approximately 24.6 feet.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.