OSHA Inspection: SUSTAINABLE CASEWORK INDUSTRIES

Issued

2014-11-18 00:00:00

Abate by

2014-12-01 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  On or about 10/10/2014, at the above addressed jobsite, a Delta RT 31 circular table saw located at the shop was not guarded exposing employees to an amputation.  NOTE: CERTIFICATION OF ABATEMENT MUST BE PROVIDED FOR THIS ITEM.

Issued

2014-11-18 00:00:00

Abate by

2014-12-01 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.304(b)(2): Outlet devices had an ampere rating less than the load being served:   On or about 10/10/2014, at the above addressed jobsite, employees were exposed to an electrical shock while plugging into a multiple plug power strip outlet to energize portable power tools, light fixtures and fan.   NOTE: CERTIFICATION OF ABATEMENT MUST BE PROVIDED FOR THIS ITEM.

Issued

2014-11-18 00:00:00

Abate by

2014-12-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:  On or about 10/10/2014, at the above addressed jobsite, the employer did not keep in a clean condition the west and south wall of the establishment as well as the circular table saw area, exposing the employees to dust inhalation.   NOTE: CERTIFICATION OF ABATEMENT MUST BE PROVIDED FOR THIS ITEM.

Issued

2014-11-18 00:00:00

Abate by

2014-12-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  On or about 10/10/2014, at the above addressed jobsite, The employer did not establish and implement a respiratory safety program for employees that are engaged in painting work in a spray booth.   NOTE: CERTIFICATION OF ABATEMENT MUST BE PROVIDED FOR THIS ITEM.

Issued

2014-11-18 00:00:00

Abate by

2014-12-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  On or about 10/10/2014, at the above addressed jobsite, the employer did not develop, implement, and maintain a written hazard communication program while using hazardous chemicals for spray painting work such as, but not limited to, thinner and varnish.   NOTE: CERTIFICATION OF ABATEMENT MUST BE PROVIDED FOR THIS ITEM.