Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JOSE VICTOR TORRES GARCIA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JOSE VICTOR TORRES GARCIA in 4442 VINYARD CREEK, GRAPEVINE, TX 76051 (NAICS 238130). OSHA activity number 340053313.

Watch Jose Victor Torres Garcia — free Get an email when a new federal OSHA severe-injury report for Jose Victor Torres Garcia is published. One employer, no account, unsubscribe in one click.
Site address
4442 VINYARD CREEK
City
GRAPEVINE
State
TX
ZIP
76051
Mailing
1200 LOWDEN CIR., APT# 128, GRAPEVINE, TX 76051
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Penalty
Initial $1020.00 · Current $1020.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   On or about October 31, 2014, on the east side of the construction site, employees engaged in framing activities used pneumatic nail guns and were not protected from struck by and eye injuries by wearing eye and face protection.
Recent events (1)
  • — Z (S) $1020

1926.416 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Penalty
Initial $1020.00 · Current $1020.00
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used.   On or about October 31, 2014, on the east side of the construction site, employees cutting framing material used a Makita skill saw that had the power cord outer sheathing cut/worn exposing employees to electrical shock hazards.
Recent events (1)
  • — Z (S) $1020

1926.304 D

Serious Gravity 1 1 instance 4 exposed
Issued
Penalty
Initial $1020.00 · Current $1020.00
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe.  On or about October 31, 2014, on the east side of the construction site, employees cutting framing material used a Makita skill saw with the blade guard wedged open in the full up position preventing the guard to retract and cover the rotating blade exposing the employees to struck-by and amputation hazards.
Recent events (1)
  • — Z (S) $1020

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).   On or about October 31, 2014, on the east side of the construction site, employees engaged in framing activities without fall protection were exposed to an unprotected fall hazard of approximately 11 feet to the lower level.
Recent events (1)
  • — Z (S) $1600

1926.1051 A

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $1200.00
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided.   On or about October 22, 2014, on the east side of the construction site, the employer did not provide a ladder where employees could safely access and egress the building upper landings exposing the employees to a potential fall of more than 11 feet.
Recent events (1)
  • — Z (S) $1200

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340053313.