OSHA Inspection: DRAEVING MACHINE TOOL, INC.

Issued

2014-11-20 00:00:00

Abate by

2014-12-31 00:00:00

Penalty

Initial $1700.00 · Current $850.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulleys, any parts of which were seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section:    On or about November 3, 2014, drive pulleys were not guarded on the Heald Bore-Matic boring machines (Models 47-A and 49).

Issued

2014-11-20 00:00:00

Abate by

2015-03-02 00:00:00

Penalty

Initial $2040.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i):  Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section:    On or about November 3, 2014, energy control procedures were not utilized during set-up activities on CNC machines.  The list of which includes, but is not limited to.    a) The Hardinge CNC Lathe-model CS 65, serial no. CLT-363-C65  b) The Kitamura CNC Mill-model Mycenter 3X, serial no. 11396

Issued

2014-11-20 00:00:00

Abate by

2015-03-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    On or about November 3, 2014, lockout or tagout devices were not affixed to energy isolating devices on CNC machines during set-up activities.

Issued

2014-11-20 00:00:00

Abate by

2014-12-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):  The employer had not provided employees with effective information and training on the details of the hazard communication program developed by the employer, including an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information:    On or about November 3, 2014, the employer had not provided affected employees with training on the new label elements and Safety Data Sheet (SDS) format associated with the revised Hazard Communication Standard (HCS 2012).