KIRKWOOD, MO —
OSHA Inspection: DYNASAUER CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DYNASAUER CORP. in 3511 TREE COURT INDUSTRIAL BLVD., KIRKWOOD, MO 63122 (NAICS 326199). OSHA activity number 340118678.
Where did this inspection happen?
- Establishment
- DYNASAUER CORP.
- Site address
- 3511 TREE COURT INDUSTRIAL BLVD.
- City
- KIRKWOOD
- State
- MO
- ZIP
- 63122
- Mailing
- 3511 TREE COURT INDUSTRIAL BLVD., KIRKWOOD, MO 63122
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Penalty
- Initial $1700.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by rotating parts: In Plant 3, the Delta Rockwell Drill Press (SN 1353885, Cat # 15-000) was missing a chuck guard.
Recent events (2)
- — I (S) $1000
- — Z (S) $1700
1910.212 B
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving: In Plant 3, the Dayton 6" Bench Grinder (Model 42123 F, Lot #9804, 3450 rpm) was not bolted or securely anchored.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(a)(4): Work rests were not adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage: In Plant 3, for the Dayton 6" Bench Grinder (Model 42123 F, Lot #9804, 3450 rpm), the distance between the work rest and the periphery of the abrasive wheel measured approximately 1/4 inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top exceed one-fourth inch: In Plant 3, for the Dayton 6" Bench Grinder (Model 42123 F, Lot #9804, 3450 rpm), the distance between the tongue guard and the periphery of the abrasive wheel measured approximately 7/8 inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 II
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections had been performed. (The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.): For employee(s) performing service or maintenance on machines including but not limited to the Admiral Processing Machine mixer (SN 1914) with electrical, air and nitrogen energy sources, periodic inspection(s) were not documented.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at DYNASAUER CORP.
Kirkwood, MO—1973-10-19 00:00:00
DYNASAUER CORP
Kirkwood, MO—1973-09-26 00:00:00
DYNASAUER CORP
View DYNASAUER CORP.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
CONNEAUT, OH—2026-07-13
CONTINENTAL STRUCTURAL PLASTICS
PETALUMA, CA—2026-07-10
LABCON NORTH AMERICA
KEEWATIN, MN—2026-07-09
111565 - TACKLE TAMER PRODUCTS INC
EAST FLAT ROCK, NC—2026-07-09
161517 - ELKAMET, INC.
LANESBOROUGH, MA—2026-07-08
LANSEN MOLD CO., INC.
More inspections in MO
KANSAS CITY, MO—2026-07-09
NIAGARA BOTTLING
MONETT, MO—2026-07-09
MONETT METALS INC.
PARKVILLE, MO—2026-07-08
SKY-TECH ROOFING, LLC.
SPRINGFIELD, MO—2026-07-07
D & C CONSTRUCTION, LLC.
JOPLIN, MO—2026-07-07
SERVICE RECYCLING - NORTH PLANT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340118678.