Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JORDAN WELDING & FABRICATION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JORDAN WELDING & FABRICATION, INC. in 2560 ATLANTIC AVENUE, DAYTONA BEACH, FL 32118 (NAICS 238120). OSHA activity number 340172790.

Watch Jordan Welding & Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for Jordan Welding & Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2560 ATLANTIC AVENUE
City
DAYTONA BEACH
State
FL
ZIP
32118
Mailing
3300 SKY STREET, DELTONA, FL 32738
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
3
Ownership type
A

4 citations on file for this inspection.

1910.178 M02

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1910.178(m)(2): Employee(s) stood under or passed under the elevated portion of a powered industrial truck(s):  a. On or about January 9, 2015, at the construction site, an employee was walking underneath the boom of a rough terrain forklift that was suspended with a load of iron, exposing him to a crushing hazard.
Recent events (1)
  • — Z (S) $2400

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a.  On or about January 9, 2015, an employee working on the ground lifting construction material to employees working above him was not wearing a hard hat, exposed to overhead hazards.
Recent events (1)
  • — Z (S) $1600

1926.501 B10

Serious Gravity 10 2 instances 2 exposed
Issued
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:  a.  On or about January 9, 2015, on the west side of the building and on the top plate, employees performing welding and decking were not protected from a 14 feet 1-inch fall hazard by the use of a fall protection system.  b.  On or about January 9, 2015, inside the northwest corner of the commercial building, employees egressed the top plate by using a mobile scaffolding exposed them to a 14 feet 1-inch fall hazard.
Recent events (1)
  • — Z (S) $2800

1926.503 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a. On or about January 9, 2015, employees working from elevations were not trained about fall protection.
Recent events (1)
  • — Z (S) $0

View JORDAN WELDING & FABRICATION, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340172790.