OSHA Inspection: CASSWAY CONTRACTING CORP

Issued

2015-01-26 00:00:00

Penalty

Initial $4500.00 · Current $4500.00

General-duty citation text

29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:   a) 3N:  On or about January 15, 2015  An employee used a unguarded table saw to cut baseboards.

Issued

2015-01-26 00:00:00

Penalty

Initial $4500.00 · Current $3600.00 Reduced

General-duty citation text

29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites.    a) 17D Kitchen:    On or about January 15, 2015    An employee used a Hilti SD 4500 which was plugged in by extension cord.  The extension cord was not protected by GFI.

Issued

2015-01-26 00:00:00

Penalty

Initial $3600.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous:    a) 17F:    On or about January 15, 2015    An employee used a drywall screw-gun which was plugged in by extension cord.  The extension cord was missing the ground pin.