OSHA Inspection: KEARNEY PRINTING L.L.C.

Issued

2015-07-13 00:00:00

Penalty

Initial $1122.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":    Southeast Corner of Bindery Room: The employer is failing to ensure that exits are clearly and visibly marked by a sign reading "Exit".

Issued

2015-07-13 00:00:00

Abate by

2015-08-06 00:00:00

Penalty

Initial $1496.00 · Current $935.00 Reduced

General-duty citation text

29 CFR 1910.305(a)(2)(ix): Lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lamp holder with a guard:    In the Bindery Room above entry door: The employer is failing to ensure that florescent light bulbs were protected from accidental breakage. During the inspection on or about 1-30-15 a florescent lighting fixture with 2- 4 foot bulbs was located approximately 82 inches above the entry door to the Bindery Room; the bulbs were not protected from accidental contact or breakage with a fixed guard or other acceptable means.

Issued

2015-07-13 00:00:00

Abate by

2015-08-06 00:00:00

Penalty

Initial $1870.00 · Current $1309.00 Reduced

General-duty citation text

29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions :    In the Bindery Room on the North and East walls near the entry door: The employer is failing to ensure that conductors entering junction boxes and lighting fixtures are protected from abrasions. During inspection on or about 1-30-15 conductors were not protected from abrasion in that:    1. 2- #12-3 Romex wire/ conductors used to energize a switch circuit for a florescent light fixture located above the entry door were not run inside/behind walls nor inside of rigid conduit.    2. 2- #12 conductors (black and white) used energize a florescent light fixture above the entry door were run from a junction box to the light. The conductors were not placed in a rigid conduit and were run through a knockout located the metal frame of the lighting fixture.