OSHA Inspection: DUNN PAPER LLC

Issued

2015-03-10 00:00:00

Abate by

2015-04-03 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

29 CFR 1910.36(h)(2): The outdoor exit route was not covered where snow and ice was likely to accumulate along the route;     2 Forbes Street, East Hartford, CT 06108, on or about 02/04/2015: The employer did not clear the outside exit route from snow and Ice exposing employees to slipping and falling hazard.

Issued

2015-03-10 00:00:00

Abate by

2015-04-03 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(2):  General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself.  2 Forbes Street, East Hartford, CT 06108, on or about 02/04/2015: Guards were not affixed to the Kalamazoo brand horizontal saw as required.

Issued

2015-03-10 00:00:00

Abate by

2015-04-03 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

29 CFR 1910.212(b):  Anchoring fixed machinery. Machines designed for a fixed location shall be securely anchored to prevent walking or moving.    2 Forbes Street, East Hartford, CT 06108, on or about 02/04/2015:  in the maintenance shop the Bridgeport machine was not securely anchored as required.

Issued

2015-03-10 00:00:00

Abate by

2015-04-03 00:00:00

Penalty

Initial $2800.00 · Current $1960.00 Reduced

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch:     2 Forbes Street, East Hartford, CT 06108, on or about 02/04/2015: The distance between the tongue guard and the abrasive wheel periphery measured approximately 3/4 of an inch