OSHA Inspection: EXCLUSIVE DOORS AND MOLDING

Issued

2015-08-07 00:00:00

Abate by

2015-08-13 00:00:00

Penalty

Initial $4900.00 · Current $3250.00 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    Location:    376 Flushing Avenue, Brooklyn, NY. Wood Machine Area.    a)         The unisaw with a biesemeyer fence system that is mounted on a delta platform, had a loose guard sitting on the saw that was not secured. The employer did not provide adequate safety measures to protect the employees from amputation. On or about 02/11/2015.

Issued

2015-08-07 00:00:00

Abate by

2015-08-26 00:00:00

Penalty

Initial $3500.00 · Current $2300.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).    Location:   376 Flushing Avenue, Brooklyn, NY    a) Employees operating the power industrial truck without being certified and not trained. On or about 02/11/15.      Abatement Note:    The certification shall include:    1.    The name of the operator.  2.    The date of the training.  3.    The date of the evaluation; and  3.    The identity of the person(s) performing the training or evaluation.

Issued

2015-08-07 00:00:00

Abate by

2015-08-26 00:00:00

Penalty

Initial $700.00 · Current $350.00 Reduced

General-duty citation text

29 CFR 1904.29(a): Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300-A is the Summary of Work-Related Injuries and Illnesses, and the OSHA 301 form is called the Injury and Illness Incident Report.    Location: Company Office.    a) The employer did not keep an OSHA 300 log of all Work-Related Injuries and Illnesses and the respective OSHA 301 form. On or about 02/11/2015.

Issued

2015-08-07 00:00:00

Abate by

2015-08-19 00:00:00

Penalty

Initial $700.00 · Current $350.00 Reduced

General-duty citation text

29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.    Location:    376 Flushing Avenue, Brooklyn, NY. Wood Machine Area.    a)  The employer did not have a written certification of his personal protective equipment (PPE) assessment as required. On or about 02/11/2015.      Abatement Note:    1.    The identity of the work place evaluated.  2.    The person certifying the evaluation has been performed.  3.    The dates of the hazard assessment.  4.    Identification of the document as a certification of the hazard assessment.