MENTOR, OH —
OSHA Inspection: THE LINTERN CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE LINTERN CORPORATION in 8658 STATION ST., MENTOR, OH 44060 (NAICS 332999). OSHA activity number 340419233.
Watch THE Lintern Corporation — free
Get an email when a new federal OSHA severe-injury report for THE Lintern Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- THE LINTERN CORPORATION
- Site address
- 8658 STATION ST.
- City
- MENTOR
- State
- OH
- ZIP
- 44060
- Mailing
- 8658 STATION ST., MENTOR, OH 44060
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 32
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.132 A
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2000.00 Reduced
2310
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: On or about February 23, 2015, the employer failed to ensure employees adding water to lead acid batteries of Crown electric forklift, serial number 9A149337, were protected from being splashed with acid by wearing a rubber apron.
Recent events (2)
- — I (O) $2000
- — Z (S) $2800
1910.138 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
2310
General-duty citation text
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes: On or about February 23, 2015, the employer failed to ensure employees adding water to lead acid batteries of Crown electric forklift, serial number 9A149337, were protected from being splashed with acid by wearing acid proof gloves.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
2310
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: On or about February 23, 2015, the employer failed to ensure an eye wash/shower was available in the event employees adding water to lead acid batteries of Crown electric forklift, serial number 9A149337, were splashed with acid.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $0.00 Reduced
8870
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about February 23, 2015, the employer failed to ensure employees used lockout/tagout procedures while cleaning the Powermatic bandsaw, model 87, serial number 087135.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.147 C07 I
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $0.00 Reduced
8870
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: On or about February 23, 2015, the employer failed to ensure employees that clean the chips from inside Powermatic bandsaw, model number 87. serial number 087135 received authorized training.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.179 J02 III
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $2000.00 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: On or about February 23, 2015, the employer failed to ensure certified hook inspections were performed and documented for the Coffing two (2) ton dock crane in the production area.
Recent events (2)
- — I (O) $2000
- — Z (S) $3500
1910.179 J02 IV
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed: On or about February 23, 2015, the employer failed to ensure certified wire rope inspections were performed and documented for the Coffing two (2) ton dock crane in the production area.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $3500.00
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about February 23, 2015, the employer failed to ensure the Powermatic Houdaille Vertical Mill, model number RVN, serial number 761242 was properly guarded in order to protect employees from flying chips and the rotating chuck during operations.
Recent events (2)
- — I (S) $3500
- — Z (S) $3500
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $3500.00
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: On or about February 23, 2015, the employer failed to properly guard the point of operation of the Winton Tube Bender, model number RD18, serial number 548.
Recent events (2)
- — I (S) $3500
- — Z (S) $3500
1910.178 L06
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: On or about February 23, 2015, the employer failed to ensure there was written certification of training for employees operating Crown electric forklift, serial number 9A149337.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332999)
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
HUNTINGDON VALLEY, PA—2026-07-09
METAL ALLIANCE, INC.
AITKIN, MN—2026-07-01
111512 - TEEMARK MANUFACTURING INC
SOUTH EL MONTE, CA—2026-06-29
VAGA INDUSTRIES
More inspections in OH
OXFORD, OH—2026-07-13
R&R SIDING LLC
CONNEAUT, OH—2026-07-13
CONTINENTAL STRUCTURAL PLASTICS
CAMDEN, OH—2026-07-13
ALBERTO MORALES
HARRISON, OH—2026-07-10
WEBER FAMILY FARMS LLC
JEFFERSON, OH—2026-07-10
LAKE CITY PLATING LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340419233.