OSHA Inspection: THE SOUTHWELL COMPANY,INC

Issued

2015-07-02 00:00:00

Abate by

2015-07-13 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(ii):  The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck:  Main Production Floor:  On or about March 16, 2015, an employee was exposed to a struck-by hazard, from operating a Hyster Lift Truck, Model S50X, while not being trained on its safe operation.

Issued

2015-07-02 00:00:00

Abate by

2015-07-13 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Main Production Floor:  On or about March 16, 2015, an employee was exposed to a caught-in hazard when operating a Rockwell 10" Unisaw, Model 34-450, while the unused portion of the saw blade was not guarded.

Issued

2015-07-02 00:00:00

Abate by

2015-07-13 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):      a)  Foundry Area:  On or about March 16, 2015, an employee was exposed to a caught-in hazard, from operating a Muller Machine, while the rotating pulley of the power transmission system was not fully guarded.     b)  Main Production Floor:  On or about March 16, 2015, an employee was exposed to a caught-in hazard, from operating a Rockwell 10" Unisaw, Model 34-450, while the rotating pulley of the power transmission system was not fully guarded.

Issued

2015-07-02 00:00:00

Abate by

2015-07-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):  a)  Foundry Area:  On or about March 16, 2015, an employee was exposed to a caught-in hazard, from operating a Muller Machine, while the belt of the power transmission system was not fully guarded.    b)  Main Production Floor:  On or about March 16, 2015, an employee was exposed to a caught-in hazard, from operating a Rockwell 10" Unisaw, Model 34-450, while the rotating belt of the power transmission system was not fully guarded.