OSHA Inspection: CHEETAH CHASSIS CORPORATION

Issued

2015-05-08 00:00:00

Abate by

2015-08-25 00:00:00

Penalty

Initial $2700.00 · Current $2025.00 Reduced

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    a) Line #2, Axle Assembly Area: Employees were exposed to a fall of approximately 5 1/2 feet while installing axles on top of an inverted trailer chassis, on or about March 17, 2015.    b) Line #1: Employees were exposed to a fall of approximately 4 1/2 feet while installing axles on top of an inverted trailer chassis, on or about March 18, 2015.    ABATEMENT CERTIFICATION REQUIRED

Issued

2015-05-08 00:00:00

Abate by

2015-06-25 00:00:00

Penalty

Initial $2700.00 · Current $2025.00 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(i)(A): Helmets or hand shields were not used during arc welding or arc cutting operations:    a) Line #1: Employees installing axles on a trailer chassis did not use proper eye protection while performing arc welding operations, on or about March 18, 2015.    ABATEMENT CERTIFICATION REQUIRED

Issued

2015-05-08 00:00:00

Abate by

2015-06-25 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by non combustible or flame proof screens or shields:  a) Line #2, Axle Assembly Area: A fixed welding station was not enclosed by protective screens exposing workers in the area to hazardous welding rays, on or about March 17, 2015.     b) Line #1: A fixed welding station adjacent to the main aisle way was not enclosed by protective screens exposing workers in the area to hazardous welding rays, on or about March 18, 2015.    ABATEMENT CERTIFICATION REQUIRED