HOLMES BEACH, FL —
OSHA Inspection: SRQ FRAMING LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SRQ FRAMING LLC in 120 NEPTUNE LANE, HOLMES BEACH, FL 34217 (NAICS 238130). OSHA activity number 340473867.
Where did this inspection happen?
- Establishment
- SRQ FRAMING LLC
- Site address
- 120 NEPTUNE LANE
- City
- HOLMES BEACH
- State
- FL
- ZIP
- 34217
- Mailing
- 5844 MERIWETHER PLACE, SARASOTA, FL 34232
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.403 B02
- Issued
- Penalty
- Initial $3080.00 · Current $1540.00 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) For employees working at 120 Neptune Lane in Holmes Beach, as observed on or about March 17, 2015. Employees were using metal electrical boxes as extension outlets for the temporary wiring that were not used in accordance with the manufacturers listing and labeling instructions. b) For employees working at 120 Neptune Lane in Holmes beach, as observed on or about March 17, 2015. Employees were using Romex brand solid copper wire as the supply cord for the metal electrical boxes that were used as extension outlets. Romex brand solid copper wiring is designed to be used as permanent installed affixed wiring.
Recent events (2)
- — I (S) $1540
- — Z (S) $3080
1926.405 G02 IV
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) For employees working at 120 Neptune Lane in Holmes beach, as observed on or about March 17, 2015. Employees were using Romex brand solid copper wire as flexible wiring for the supply cord of the metal electrical boxes that were used as extension outlets. The wiring did not have strain relief at the point of entry into the metal box to prevent the pull from directly being transmitted to the terminal screws.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.405 B01
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.405(b)(1): Conductors entering boxes, cabinets, and fittings were not protected from abrasion: a) For employees working at 120 Neptune Lane in Holmes beach, as observed on or about March 17, 2015. Employees were using Romex brand solid copper wire as flexible wiring for the supply cord of the metal electrical boxes that were used as extension outlets. The wiring did not have a fitting at the point of entry into the metal box to protect the wire from abrasion.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B13
- Issued
- Penalty
- Initial $6160.00 · Current $3080.00 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) For employees working at 120 Neptune Lane in Holmes Beach, as observed on or about March 17, 2015. Employees were installing floor joists for the third floor of a residential home without the use of fall protection. Employees were exposed to a fall hazard of 8 feet 1 1/2 inches to the second floor and over 30 feet to the ground below. b) For employees working at 120 Neptune Lane in Holmes Beach, as observed on or about March 17, 2015. Employees were constructing and erecting walls on the second floor with an unprotected edge. Employees were exposed to a fall hazard of approximately 10 feet . to the first floor. Keith Kleppinger Construction Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(1), which was contained in OSHA inspection number 314843392, citation number 01, item number 01 and was affirmed as a final order on September 20, 2010, with respect to a workplace located at 310 68th Street in Holmes Beach, FL.
Recent events (2)
- — I (R) $3080
- — Z (R) $6160
1926.403 B01 III
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.403(b)(1)(iii): Safety of equipment was not determined on the basis of electrical insulation. a) For employees working at 120 Neptune Lane in Holmes beach, as observed on or about March 17, 2015. Employees were using an extension cord to power tools that had damaged or removed insulation exposing the three inner conductors to possible damage during use.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238130)
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
WOODHAVEN, MI—2026-07-16
G.J. PERELLI CO., L.L.C.
PHILADELPHIA, PA—2026-07-16
URUS CONSTRUCTION CORPORATION
BERLIN, NJ—2026-07-16
URUS CONSTRUCTION CORPORATION
MERIDIAN, ID—2026-07-15
TRIPLE R CONSTRUCTION LLC
More inspections in FL
MARIANNA, FL—2026-07-16
BRANNON BROTHERS CONSTRUCTION, LLC
LAKELAND, FL—2026-07-16
SOUTHERN MILLING & LUMBER, INC.
OAKLAND PARK, FL—2026-07-16
PKB CABINETRY
LAKELAND, FL—2026-07-16
ELIJAH WHOLESALE, LLC.
TAMPA, FL—2026-07-16
VALENCIA WHOLESALE, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340473867.